{"title":"Fuel Rails","description":"\u003cp\u003eBillet fuel rails and rail kits for Coyote, Godzilla and other high-horsepower builds.\u003c\/p\u003e","products":[{"product_id":"bps-fuel-rails-2007-2014-gt500","title":"BPS Fuel Rails (2007-2014 GT500)","description":"\u003cp\u003eThe factory GT500 fuel system holds up fine at factory power. Start pulling the blower pulley down, add boost, or move to a larger injector, and the restriction moves upstream. You can have pump and injector capacity on paper and still watch rail pressure fall away at the top of a run, because the rail itself cannot keep both banks fed.\u003c\/p\u003e\n\u003cp\u003eThese are one-piece billet 6061 rails with an \u003cstrong\u003e11\/16 inch bore, the largest diameter available for this application\u003c\/strong\u003e. One piece matters: there are no welded end caps and no sealant anywhere in the fuel path. Those are the two things that fail on fabricated rails, and they fail under pressure.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece precision machined billet 6061 aluminum, no welds and no caulk\u003c\/li\u003e\n\u003cli\u003eHigh flow 11\/16 inch bore\u003c\/li\u003e\n\u003cli\u003e-8AN high pressure ports\u003c\/li\u003e\n\u003cli\u003eProvision for the factory fuel rail pressure sensor\u003c\/li\u003e\n\u003cli\u003eTwo 1\/8 inch ports for a remote fuel pressure sending unit, a gauge, or a nitrous supply taken straight off the rail\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware included\u003c\/li\u003e\n\u003cli\u003eMachined in Napierville, Quebec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment and part numbers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eRails only\u003c\/th\u003e\n\u003cth\u003eRails with fuel line adapter kit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2012 Shelby GT500, 5.4L\u003c\/td\u003e\n\u003ctd\u003eF001\u003c\/td\u003e\n\u003ctd\u003eF001-adapter kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2014 Shelby GT500, 5.8L Trinity\u003c\/td\u003e\n\u003ctd\u003eF001\u003c\/td\u003e\n\u003ctd\u003eF001-adapter kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eWhat else you will need.\u003c\/strong\u003e The rails take -8AN feed. The optional fuel line adapter kit supplies the fittings and the hose to plumb them, which is the shortest path if you are not already running an aftermarket regulator and return line. If the feed has to turn back on itself at the rail, or you are keeping the factory 3\/8 inch quick connect, the \u003ca href=\"\/products\/bps-180-fuel-line-adapter-8an-orb-3-8in\"\u003e180 degree fuel line adapter\u003c\/a\u003e is the part that makes that joint without kinking hose.\u003c\/p\u003e\n\u003cp\u003eBuilding something else? We machine rails for the \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003e2011-2025 Coyote and Voodoo\u003c\/a\u003e under F002, and for the \u003ca href=\"\/products\/2020-ford-7-3l-godzilla-billet-fuel-rails-1\"\u003e2020 and newer 7.3L Godzilla\u003c\/a\u003e under F007.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part numbers:\u003c\/strong\u003e F001, F001-adapter kit\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"No Thanks","offer_id":39368659075254,"sku":"F001","price":290.0,"currency_code":"USD","in_stock":true},{"title":"Fuel line adapter kit","offer_id":39368659108022,"sku":"F001-adapter kit","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/bps-fuel-rails-2007-2014-gt500-131647.jpg?v=1738517445"},{"product_id":"bps-fuel-rails-2011-mustang","title":"BPS Fuel Rails 2011-2025 Mustang Coyote","description":"\u003cp\u003eFactory fuel rails are built for factory power. Once you start pushing real boost or nitrous through a Coyote, restrictive OE rails become the bottleneck. BPS Fuel Rails are one piece billet units machined from 6061-T6 aluminum with an 11\/16 inch high flow bore, built to feed the engine consistently as the power climbs.\u003c\/p\u003e\n\u003cp\u003eThey fit any 5.0L Coyote application, including 2018 and newer direct injection engines, and an optional plumbing kit lets you install them onto the OE returnless fuel system without reworking your fuel setup. Each rail includes 1\/8 inch ports for a remote fuel pressure sending unit or gauge, and to feed a nitrous injection system straight off the rail.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne piece precision machined billet 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eHigh flow 11\/16 inch bore\u003c\/li\u003e\n\u003cli\u003e1\/8 inch ports for fuel pressure sensor, gauge, or nitrous supply\u003c\/li\u003e\n\u003cli\u003eOptional plumbing kit for OE returnless fuel system installation\u003c\/li\u003e\n\u003cli\u003eMachined in house at Billet Pro Shop, Napierville, Quebec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment and part numbers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eRails only\u003c\/th\u003e\n\u003cth\u003eWith plumbing kit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2017 Coyote 5.0L\u003c\/td\u003e\n\u003ctd\u003eF002-1117\u003c\/td\u003e\n\u003ctd\u003eF002-1117plumbingkit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2025 Coyote 5.0L, including Darkhorse\u003c\/td\u003e\n\u003ctd\u003eF002-1821\u003c\/td\u003e\n\u003ctd\u003eF002-1821plumbingkit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019 Voodoo 5.2L (GT350)\u003c\/td\u003e\n\u003ctd\u003eF002-15GT350\u003c\/td\u003e\n\u003ctd\u003eF002-1519GT350plumbingkit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe plumbing kit is what lets these run on the factory returnless system. If you are already running an aftermarket regulator and return line, order the rails on their own. The plumbing kit is also sold separately under part number \u003ca href=\"\/products\/bps-fuel-line-plumbing-kit-2007-2014-gt500\"\u003eF003\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn a 2018 and newer direct injection engine\u003c\/strong\u003e two small fittings usually come up with these rails: the \u003ca href=\"\/products\/bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting\"\u003e1\/8 NPT to M10x1 adapter\u003c\/a\u003e (F005) to run the factory fuel rail pressure sensor on an aftermarket rail, and the \u003ca href=\"\/products\/bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting-1\"\u003e1\/8 NPT to 3\/8 inch adapter\u003c\/a\u003e (F006) for the direct injection feed hose. If the DI pump is coming out altogether, that opening is closed by the \u003ca href=\"\/products\/bps-direct-injection-pump-block-off-2018-mustang\"\u003edirect injection pump block off\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBuilding a GT500 or a 7.3 Godzilla? We machine rails for those as well: \u003ca href=\"\/products\/bps-fuel-rails-2007-2014-gt500\"\u003eF001 for the 2007-2014 GT500\u003c\/a\u003e and \u003ca href=\"\/products\/2020-ford-7-3l-godzilla-billet-fuel-rails-1\"\u003eF007 for the 2020 and newer 7.3L Godzilla\u003c\/a\u003e.\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"2011-2017 Coyote \/ No Thanks","offer_id":39368658878646,"sku":"F002-1117","price":280.0,"currency_code":"USD","in_stock":true},{"title":"2011-2017 Coyote \/ Yes Please","offer_id":39368658911414,"sku":"F002-1117plumbingkit","price":430.0,"currency_code":"USD","in_stock":true},{"title":"2018-2025 Coyote (including Darkhorse) \/ No Thanks","offer_id":39368658944182,"sku":"F002-1821","price":300.0,"currency_code":"USD","in_stock":true},{"title":"2018-2025 Coyote (including Darkhorse) \/ Yes Please","offer_id":39368658976950,"sku":"F002-1821plumbingkit","price":480.0,"currency_code":"USD","in_stock":true},{"title":"2015-2019 Voodoo \/ No Thanks","offer_id":39368659009718,"sku":"F002-15GT350","price":300.0,"currency_code":"USD","in_stock":true},{"title":"2015-2019 Voodoo \/ Yes Please","offer_id":39368659042486,"sku":"F002-1519GT350plumbingkit","price":465.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/bps-fuel-rails-2011-2022-mustang-coyote-140278.jpg?v=1738517444"},{"product_id":"bps-fuel-line-plumbing-kit-2007-2014-gt500","title":"BPS Fuel Line Adapter\/Plumbing Kit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFuel Line Adapter kit which provides you with all the fuel fittings needed along with pushlock fuel hose to connect to your factory feed fitting using BPS Fuel Rails. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePicture for reference only, you will receive required fittings and hose length for your application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part numbers:\u003c\/strong\u003e F003-GT500, F003-1117Coy, F003-1821Coy, F003-1519GT350\u003c\/p\u003e\n\u003cp\u003eThe part numbers map to the rails: F003-GT500 for the \u003ca href=\"\/products\/bps-fuel-rails-2007-2014-gt500\"\u003e2007-2014 GT500 rails\u003c\/a\u003e (F001), and F003-1117Coy, F003-1821Coy and F003-1519GT350 for the \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003eCoyote and Voodoo rails\u003c\/a\u003e (F002) in 2011-2017, 2018-2025 and 2015-2019 GT350 respectively. Order the kit that matches the rail, not the car year alone.\u003c\/p\u003e\n\u003cp\u003eIf you are already running an aftermarket regulator and a return line, you do not need this kit — the rails go straight onto that system.\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"2007-2014 GT500","offer_id":39368658550966,"sku":"F003-GT500","price":159.0,"currency_code":"USD","in_stock":true},{"title":"2011-2017 Coyote","offer_id":39368658583734,"sku":"F003-1117Coy","price":159.0,"currency_code":"USD","in_stock":true},{"title":"2018-2021 Coyote","offer_id":39368658616502,"sku":"F003-1821Coy","price":180.0,"currency_code":"USD","in_stock":true},{"title":"2015-2019 GT350","offer_id":39368658649270,"sku":"F003-1519GT350","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/bps-fuel-line-adapterplumbing-kit-176637.jpg?v=1738517443"},{"product_id":"bps-180-fuel-line-adapter-8an-orb-3-8in","title":"BPS 180* Fuel Line Adapter","description":"\u003cp\u003eA small part that solves a packaging problem. The feed arrives at the rail from one direction and the hose has to leave in the other, around a blower snout, past a header, or back down to the factory line. Trying to turn -8 hose through 180 degrees in that space either does not fit or kinks, and a kinked feed line is a fuel pressure problem you will chase for a week.\u003c\/p\u003e\n\u003cp\u003eThis adapter makes the turn at the rail instead. It threads into BPS or other aftermarket -8AN fuel rails and keeps the whole bend tight against the rail.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum, hard black anodized\u003c\/li\u003e\n\u003cli\u003eLow profile, so the turn happens at the rail rather than out in the engine bay\u003c\/li\u003e\n\u003cli\u003eLeak proof O-ring seal\u003c\/li\u003e\n\u003cli\u003e1\/8 inch NPT port with plug supplied, for a gauge or a pressure sender\u003c\/li\u003e\n\u003cli\u003eMachined in Napierville, Quebec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart numbers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter only\u003c\/td\u003e\n\u003ctd\u003eF004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter with -8ORB to 3\/8 inch quick connect fitting\u003c\/td\u003e\n\u003ctd\u003eF004-38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eWhich one you want.\u003c\/strong\u003e If you are already running -8 hose with your own fittings, F004 on its own is the part. If you are keeping the \u003cstrong\u003efactory 3\/8 inch quick connect feed line\u003c\/strong\u003e and adapting it to aftermarket rails, order F004-38. The added -8ORB to 3\/8 quick connect fitting is what makes that joint, and it is the piece people discover they are missing with the car already on the lift.\u003c\/p\u003e\n\u003cp\u003ePairs with our \u003ca href=\"\/products\/bps-fuel-rails-2007-2014-gt500\"\u003eGT500 fuel rails\u003c\/a\u003e and \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003eCoyote fuel rails\u003c\/a\u003e, and with any other aftermarket rail using -8AN ORB ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part numbers:\u003c\/strong\u003e F004, F004-38\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Add -8 ORB to 3\/8 Quick Connect Adapter","offer_id":46058390061271,"sku":"F004-38","price":70.0,"currency_code":"USD","in_stock":true},{"title":"No thanks","offer_id":46058390094039,"sku":"F004","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/bps-180-fuel-line-adapterbillet-pro-shop-8212736.jpg?v=1774354027"},{"product_id":"bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting","title":"BPS 1\/8in NPT to M10x1 Fuel Rail Pressure Sensor Fitting","description":"\u003cp\u003eFor use when installing factory M10x1 Fuel Rail Pressure Sensor (18+ Coyote) on Aftermarket Fuel Rails. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part number:\u003c\/strong\u003e F005\u003c\/p\u003e\n\u003cp\u003eThe rails this is for are our \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003e2011-2025 Coyote fuel rails\u003c\/a\u003e (F002) in 2018 and newer direct injection form. The other fitting that comes up on the same install is the \u003ca href=\"\/products\/bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting-1\"\u003e1\/8 NPT to 3\/8 inch adapter\u003c\/a\u003e (F006) for the DI feed hose.\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Default Title","offer_id":38057987244214,"sku":"F005","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/bps-18in-npt-to-m10x1-fuel-rail-pressure-sensor-fittingbillet-pro-shop-411722.jpg?v=1743817914"},{"product_id":"bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting-1","title":"BPS 1\/8in NPT to 3\/8in Fuel Line adapter","description":"\u003cp\u003eFor use when plumbing direct injection feed hose on 18+ Coyote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part number:\u003c\/strong\u003e F006\u003c\/p\u003e\n\u003cp\u003eUsed alongside our \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003e2011-2025 Coyote fuel rails\u003c\/a\u003e (F002) on 2018 and newer engines. To run the factory M10x1 fuel rail pressure sensor on those rails you also need the \u003ca href=\"\/products\/bps-1-8in-npt-to-m10x1-fuel-rail-pressure-sensor-fitting\"\u003e1\/8 NPT to M10x1 adapter\u003c\/a\u003e (F005). Deleting the direct injection pump instead? That is the \u003ca href=\"\/products\/bps-direct-injection-pump-block-off-2018-mustang\"\u003eDI pump block off\u003c\/a\u003e.\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Default Title","offer_id":38058001662134,"sku":"F006","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/bps-18in-npt-to-38in-fuel-line-adapterbillet-pro-shop-971801.jpg?v=1743817907"},{"product_id":"2020-ford-7-3l-godzilla-billet-fuel-rails-1","title":"BPS 2020+ Ford 7.3L Godzilla Billet Fuel Rails","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eFord’s new 7.3L Godzilla platform is gaining traction with swaps popping up everywhere. We wasted no time in releasing new high flow -8 AN fuel rails to meet your fueling needs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined billet 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eHard black anodized coating\u003c\/li\u003e\n\u003cli\u003eHigh Flow 11\/16” bore \u003c\/li\u003e\n\u003cli\u003eIncludes 1\/8” ports for the installation of various remote fuel pressure sending units, gauges or to provide fuel supply for nitrous injection systems. \u003c\/li\u003e\n\u003cli\u003eIncludes stainless steel hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBPS part number:\u003c\/strong\u003e F007\u003c\/p\u003e\n\u003cp\u003eSame rails in the other platforms we machine for: \u003ca href=\"\/products\/bps-fuel-rails-2011-mustang\"\u003eF002 for 2011-2025 Coyote and Voodoo\u003c\/a\u003e, and \u003ca href=\"\/products\/bps-fuel-rails-2007-2014-gt500\"\u003eF001 for the 2007-2014 GT500\u003c\/a\u003e. The rest of what we make for this engine is in \u003ca href=\"\/collections\/billet-pro-shop-godzilla\"\u003eGodzilla 7.3L\u003c\/a\u003e.\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Default Title","offer_id":39562127114422,"sku":"F007","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/bps-2020-ford-73l-godzilla-billet-fuel-railsbillet-pro-shop-1470610.jpg?v=1771403828"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/collections\/bps-fuel-rails-2011-2022-mustang-coyote-140278_8814fbb0-1150-488f-9adc-5da90ede337f.jpg?v=1793367375","url":"https:\/\/billetproshop.com\/collections\/parts-fuel-rails.oembed","provider":"Billet Pro Shop","version":"1.0","type":"link"}