{"title":"AEM Water\/Methanol Injection Kits","description":"\u003cp\u003eComplete AEM V3 water\/methanol injection kits: boost dependent standard (35 psi) and HD (40 psi) controllers, and Multi-Input kits for high compression naturally aspirated and high boost engines, with a 1.15 gallon reservoir, a 5 gallon tank or no tank.\u003c\/p\u003e","products":[{"product_id":"aem-v3-water-methanol-injection-kit-35-psi-standard-controller-1-15-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 35 PSI Standard Controller, 1.15 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 water\/methanol injection kit for boosted gas engines running up to 35 psi. The boost dependent controller has an on-board MAP sensor with a molded-in nipple for the boost hose, so there is no external sensor to wire. Water\/methanol injection lowers inlet air temperature and suppresses detonation, which gives you room to run more boost and timing. This kit comes with the 1.15 gallon reservoir.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent controller with internal MAP sensor, 35 psi max\u003c\/li\u003e\n\u003cli\u003eLarge adjustment knobs for the start and full activation points, covered status LED and test button\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output triggers on a short, loss of continuity, high or low voltage or low fluid. Use it to flash a warning light, pull boost or timing, or switch fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, color coded wires, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injector with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eThree interchangeable injector nozzles: 250, 500 and 1,000 cc\/min\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eReservoir with built-in conductive low fluid level sensor\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003cli\u003eIntegrated fuse and molded mounting tabs on the controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eBoost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e35 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e1.15 gallon with low fluid level sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzles\u003c\/td\u003e\n\u003ctd\u003e250, 500 and 1,000 cc\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent controller and wiring harness\u003c\/li\u003e\n\u003cli\u003eWater\/methanol pump\u003c\/li\u003e\n\u003cli\u003e1.15 gallon reservoir with fluid level sensor\u003c\/li\u003e\n\u003cli\u003eBillet injector with three nozzles\u003c\/li\u003e\n\u003cli\u003eLED dash light\u003c\/li\u003e\n\u003cli\u003e20 ft. of injection tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzle.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409899223,"sku":"30-3300","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/186557883fc7531bbeca650f43dcb041f8b0553c.jpg?v=1795278428"},{"product_id":"aem-v3-water-methanol-injection-kit-40-psi-hd-controller-5-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 40 PSI HD Controller, 5 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 HD water\/methanol injection kit for race and turbo diesel applications. The boost dependent HD controller has an on-board MAP sensor good to 40 psi with a molded-in nipple for the boost hose, and the kit comes with the 5 gallon reservoir. Water\/methanol injection on a turbocharged or supercharged engine lowers inlet air temperature, improves combustion efficiency and suppresses detonation, so you can add boost and timing reliably.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent HD controller with internal MAP sensor, 40 psi max\u003c\/li\u003e\n\u003cli\u003eMolded-in nipple on the controller for the boost hose pickup\u003c\/li\u003e\n\u003cli\u003e5 gallon reservoir\u003c\/li\u003e\n\u003cli\u003eFor forced induction gas and turbo diesel applications\u003c\/li\u003e\n\u003cli\u003eUniversal installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eHD boost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e40 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRunning more than 40 psi, or want to trigger off MAF or injector duty cycle? See the Multi-Input kits (30-3351 with 5 gallon tank, 30-3352 without a tank). The same HD kit is available without a reservoir as 30-3303.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409931991,"sku":"30-3301","price":727.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/0a326b269f035029c5dc691809f0c4251d6f635a_0f3701cb-dd18-4788-a864-02abb8fb737b.jpg?v=1795278429"},{"product_id":"aem-v3-water-methanol-injection-kit-35-psi-standard-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 standard water\/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The boost dependent controller has an on-board MAP sensor and works on forced induction gas engines up to 35 psi. Water\/methanol injection lowers inlet air temperature and suppresses detonation, so you can run more boost and ignition timing without stepping up to race fuel.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent standard controller with internal MAP sensor, 35 psi max\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eInterchangeable injector nozzles\u003c\/li\u003e\n\u003cli\u003eIncludes a fitting for a third party tank\u003c\/li\u003e\n\u003cli\u003eLED system status light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eBoost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e35 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eNeed a tank? AEM offers a 1.15 gallon reservoir (30-3325) and a 5 gallon tank (30-3320), both with a fluid level sensor. The same kit with the 1.15 gallon reservoir is 30-3300.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409964759,"sku":"30-3302","price":531.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/b016fb1249f0b0d2c86f8d82664709cc8dc644ef.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-40-psi-hd-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 40 PSI HD Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 HD water\/methanol kit without the tank, for race and diesel applications that already have a reservoir or need a custom one. The boost dependent HD controller has an on-board MAP sensor rated to 40 psi. Water\/methanol injection lowers inlet air temperature and suppresses detonation, so you can run more boost and timing reliably.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD controller with internal MAP sensor, rated up to 40 psi\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eInterchangeable injector nozzles\u003c\/li\u003e\n\u003cli\u003eIncludes a fitting for a third party tank\u003c\/li\u003e\n\u003cli\u003eLED system status light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eHD boost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e40 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eNeed a tank? AEM offers a 1.15 gallon reservoir (30-3325) and a 5 gallon tank (30-3320), both with a fluid level sensor. The same HD kit with the 5 gallon reservoir is 30-3301.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409997527,"sku":"30-3303","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/a807c8c24b17575f63b0ba7bcbbc934ffe59fa8d.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-1-15-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, 1.15 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 water\/methanol kit with the Multi-Input controller, for high compression naturally aspirated engines and for boosted engines running more pressure than the standard controller's internal sensor can read. Instead of an on-board MAP sensor, the Multi-Input controller takes its signal from an external 0 to 5 V MAP sensor, a frequency based or 0 to 5 V MAF, or a frequency based injector duty cycle signal. This kit comes with the 1.15 gallon reservoir and a single injector.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-Input controller: external 0 to 5 V MAP, frequency or voltage MAF, or injector duty cycle\u003c\/li\u003e\n\u003cli\u003eWorks on naturally aspirated engines through the MAF or duty cycle settings, and on high boost engines above 35 psi with an external MAP sensor\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output for a warning light, pulling boost or timing, or switching fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injector with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eInterchangeable 250, 500 and 1,000 cc\/min nozzles\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eReservoir with conductive low fluid level sensor\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e1.15 gallon with low fluid level sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. AEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzle.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410030295,"sku":"30-3350","price":584.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/edc15d09329fe68c6893ad9464eca6d2a89bc750.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-5-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, 5 Gallon Reservoir","description":"\u003cp\u003eThe big one in AEM's Multi-Input lineup: the V3 water\/methanol kit with the 5 gallon tank and two injectors, built for HD high output gasoline applications. The Multi-Input controller takes its signal from an external 0 to 5 V MAP sensor, a frequency based or 0 to 5 V MAF, or a frequency based injector duty cycle signal, so it works on ultra high boost engines that are past the range of the boost dependent controllers.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-Input controller: external 0 to 5 V MAP, frequency or voltage MAF, or injector duty cycle\u003c\/li\u003e\n\u003cli\u003e5 gallon tank and two injectors\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output for a warning light, pulling boost or timing, or switching fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injectors with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3351\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. AEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzles.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410063063,"sku":"30-3351","price":727.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/a6472d9ad1b6e9a1810e3416bc91af0b12b91758.jpg?v=1795278431"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 Multi-Input water\/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The Multi-Input controller is the alternative to a boost dependent controller: it runs high compression naturally aspirated engines through the MAF or injector duty cycle settings, and ultra high boost engines above 40 psi through an external MAP sensor. This is the tank-less kit with a single injector.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChoose one of several signal inputs to control flow: external 0 to 5 V MAP sensor, frequency based injector duty cycle, frequency based MAF or 0 to 5 V MAF\u003c\/li\u003e\n\u003cli\u003eOptional wiring for a water\/methanol solenoid built into the harness\u003c\/li\u003e\n\u003cli\u003eV3 nozzle with improved atomization of the water\/methanol mixture\u003c\/li\u003e\n\u003cli\u003eNo reservoir, so you can integrate a custom or third party tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3352\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. The same controller is available in a kit with a 1.15 gallon tank (30-3350) and with a 5 gallon tank and two injectors (30-3351).\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410095831,"sku":"30-3352","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/aedb60e26150c12b0404d3f3c8dcb5f90be0d66a.jpg?v=1795278432"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/collections\/186557883fc7531bbeca650f43dcb041f8b0553c_7f67ca9e-361e-4791-8b16-4b73f54be0f8.jpg?v=1795278705","url":"https:\/\/billetproshop.com\/en-ca\/collections\/aem-water-methanol-injection-kits.oembed","provider":"Billet Pro Shop","version":"1.0","type":"link"}