{"title":"AEM","description":"\u003cp\u003eAEM Performance Electronics water\/methanol injection: V3 kits with boost dependent or Multi-Input controllers, with a 1.15 gallon reservoir, a 5 gallon tank or no tank, plus the controllers, injectors, pumps, tanks, solenoid, filter and replacement parts to build or service a system. Need an AEM part that is not listed yet? \u003ca href=\"\/en-ca\/pages\/contact-us\"\u003eContact us\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"aem-v3-water-methanol-injection-kit-35-psi-standard-controller-1-15-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 35 PSI Standard Controller, 1.15 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 water\/methanol injection kit for boosted gas engines running up to 35 psi. The boost dependent controller has an on-board MAP sensor with a molded-in nipple for the boost hose, so there is no external sensor to wire. Water\/methanol injection lowers inlet air temperature and suppresses detonation, which gives you room to run more boost and timing. This kit comes with the 1.15 gallon reservoir.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent controller with internal MAP sensor, 35 psi max\u003c\/li\u003e\n\u003cli\u003eLarge adjustment knobs for the start and full activation points, covered status LED and test button\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output triggers on a short, loss of continuity, high or low voltage or low fluid. Use it to flash a warning light, pull boost or timing, or switch fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, color coded wires, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injector with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eThree interchangeable injector nozzles: 250, 500 and 1,000 cc\/min\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eReservoir with built-in conductive low fluid level sensor\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003cli\u003eIntegrated fuse and molded mounting tabs on the controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eBoost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e35 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e1.15 gallon with low fluid level sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzles\u003c\/td\u003e\n\u003ctd\u003e250, 500 and 1,000 cc\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent controller and wiring harness\u003c\/li\u003e\n\u003cli\u003eWater\/methanol pump\u003c\/li\u003e\n\u003cli\u003e1.15 gallon reservoir with fluid level sensor\u003c\/li\u003e\n\u003cli\u003eBillet injector with three nozzles\u003c\/li\u003e\n\u003cli\u003eLED dash light\u003c\/li\u003e\n\u003cli\u003e20 ft. of injection tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzle.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409899223,"sku":"30-3300","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/186557883fc7531bbeca650f43dcb041f8b0553c.jpg?v=1795278428"},{"product_id":"aem-v3-water-methanol-injection-kit-40-psi-hd-controller-5-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 40 PSI HD Controller, 5 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 HD water\/methanol injection kit for race and turbo diesel applications. The boost dependent HD controller has an on-board MAP sensor good to 40 psi with a molded-in nipple for the boost hose, and the kit comes with the 5 gallon reservoir. Water\/methanol injection on a turbocharged or supercharged engine lowers inlet air temperature, improves combustion efficiency and suppresses detonation, so you can add boost and timing reliably.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent HD controller with internal MAP sensor, 40 psi max\u003c\/li\u003e\n\u003cli\u003eMolded-in nipple on the controller for the boost hose pickup\u003c\/li\u003e\n\u003cli\u003e5 gallon reservoir\u003c\/li\u003e\n\u003cli\u003eFor forced induction gas and turbo diesel applications\u003c\/li\u003e\n\u003cli\u003eUniversal installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eHD boost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e40 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRunning more than 40 psi, or want to trigger off MAF or injector duty cycle? See the Multi-Input kits (30-3351 with 5 gallon tank, 30-3352 without a tank). The same HD kit is available without a reservoir as 30-3303.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409931991,"sku":"30-3301","price":727.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/0a326b269f035029c5dc691809f0c4251d6f635a_0f3701cb-dd18-4788-a864-02abb8fb737b.jpg?v=1795278429"},{"product_id":"aem-v3-water-methanol-injection-kit-35-psi-standard-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 standard water\/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The boost dependent controller has an on-board MAP sensor and works on forced induction gas engines up to 35 psi. Water\/methanol injection lowers inlet air temperature and suppresses detonation, so you can run more boost and ignition timing without stepping up to race fuel.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent standard controller with internal MAP sensor, 35 psi max\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eInterchangeable injector nozzles\u003c\/li\u003e\n\u003cli\u003eIncludes a fitting for a third party tank\u003c\/li\u003e\n\u003cli\u003eLED system status light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eBoost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e35 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eNeed a tank? AEM offers a 1.15 gallon reservoir (30-3325) and a 5 gallon tank (30-3320), both with a fluid level sensor. The same kit with the 1.15 gallon reservoir is 30-3300.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409964759,"sku":"30-3302","price":531.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/b016fb1249f0b0d2c86f8d82664709cc8dc644ef.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-40-psi-hd-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, 40 PSI HD Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 HD water\/methanol kit without the tank, for race and diesel applications that already have a reservoir or need a custom one. The boost dependent HD controller has an on-board MAP sensor rated to 40 psi. Water\/methanol injection lowers inlet air temperature and suppresses detonation, so you can run more boost and timing reliably.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD controller with internal MAP sensor, rated up to 40 psi\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eInterchangeable injector nozzles\u003c\/li\u003e\n\u003cli\u003eIncludes a fitting for a third party tank\u003c\/li\u003e\n\u003cli\u003eLED system status light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eHD boost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e40 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eNeed a tank? AEM offers a 1.15 gallon reservoir (30-3325) and a 5 gallon tank (30-3320), both with a fluid level sensor. The same HD kit with the 5 gallon reservoir is 30-3301.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184409997527,"sku":"30-3303","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/a807c8c24b17575f63b0ba7bcbbc934ffe59fa8d.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-1-15-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, 1.15 Gallon Reservoir","description":"\u003cp\u003eAEM's V3 water\/methanol kit with the Multi-Input controller, for high compression naturally aspirated engines and for boosted engines running more pressure than the standard controller's internal sensor can read. Instead of an on-board MAP sensor, the Multi-Input controller takes its signal from an external 0 to 5 V MAP sensor, a frequency based or 0 to 5 V MAF, or a frequency based injector duty cycle signal. This kit comes with the 1.15 gallon reservoir and a single injector.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-Input controller: external 0 to 5 V MAP, frequency or voltage MAF, or injector duty cycle\u003c\/li\u003e\n\u003cli\u003eWorks on naturally aspirated engines through the MAF or duty cycle settings, and on high boost engines above 35 psi with an external MAP sensor\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output for a warning light, pulling boost or timing, or switching fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injector with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eInterchangeable 250, 500 and 1,000 cc\/min nozzles\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eReservoir with conductive low fluid level sensor\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e1.15 gallon with low fluid level sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. AEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzle.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410030295,"sku":"30-3350","price":584.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/edc15d09329fe68c6893ad9464eca6d2a89bc750.jpg?v=1795278430"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-5-gallon-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, 5 Gallon Reservoir","description":"\u003cp\u003eThe big one in AEM's Multi-Input lineup: the V3 water\/methanol kit with the 5 gallon tank and two injectors, built for HD high output gasoline applications. The Multi-Input controller takes its signal from an external 0 to 5 V MAP sensor, a frequency based or 0 to 5 V MAF, or a frequency based injector duty cycle signal, so it works on ultra high boost engines that are past the range of the boost dependent controllers.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-Input controller: external 0 to 5 V MAP, frequency or voltage MAF, or injector duty cycle\u003c\/li\u003e\n\u003cli\u003e5 gallon tank and two injectors\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output for a warning light, pulling boost or timing, or switching fuel maps on a standalone ECU\u003c\/li\u003e\n\u003cli\u003eTerminated harness with positive lock connector, integrated pump ground circuit and an extra wire for an optional on\/off flow solenoid\u003c\/li\u003e\n\u003cli\u003eMachined billet injectors with integral check valve to prevent unintended flow\u003c\/li\u003e\n\u003cli\u003eRecirculation style pump with integral fittings for quiet operation\u003c\/li\u003e\n\u003cli\u003eLED dash light for system status and low fluid warning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3351\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjection tubing\u003c\/td\u003e\n\u003ctd\u003e20 ft. high pressure nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. AEM recommends running the inline filter (30-3003) on every water\/methanol system. The optional solenoid (30-3326) adds protection against unintended flow when the pump and tank sit higher than the nozzles.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410063063,"sku":"30-3351","price":727.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/a6472d9ad1b6e9a1810e3416bc91af0b12b91758.jpg?v=1795278431"},{"product_id":"aem-v3-water-methanol-injection-kit-multi-input-controller-no-reservoir","title":"AEM V3 Water\/Methanol Injection Kit, Multi-Input Controller, No Reservoir","description":"\u003cp\u003eThe AEM V3 Multi-Input water\/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The Multi-Input controller is the alternative to a boost dependent controller: it runs high compression naturally aspirated engines through the MAF or injector duty cycle settings, and ultra high boost engines above 40 psi through an external MAP sensor. This is the tank-less kit with a single injector.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChoose one of several signal inputs to control flow: external 0 to 5 V MAP sensor, frequency based injector duty cycle, frequency based MAF or 0 to 5 V MAF\u003c\/li\u003e\n\u003cli\u003eOptional wiring for a water\/methanol solenoid built into the harness\u003c\/li\u003e\n\u003cli\u003eV3 nozzle with improved atomization of the water\/methanol mixture\u003c\/li\u003e\n\u003cli\u003eNo reservoir, so you can integrate a custom or third party tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3352\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input (0 to 5 V, MAF frequency or voltage, duty cycle, external MAP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe external MAP or MAF sensor is not part of this kit. The same controller is available in a kit with a 1.15 gallon tank (30-3350) and with a 5 gallon tank and two injectors (30-3351).\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410095831,"sku":"30-3352","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/aedb60e26150c12b0404d3f3c8dcb5f90be0d66a.jpg?v=1795278432"},{"product_id":"aem-v3-water-methanol-standard-controller-kit-35-psi-controller-and-harness","title":"AEM V3 Water\/Methanol Standard Controller Kit, 35 PSI (Controller and Harness)","description":"\u003cp\u003eThe AEM V3 boost dependent water\/methanol controller and wiring harness on their own. Use it to replace a damaged controller or to build a system around your own pump, tank and injector. The on-board MAP sensor reads up to 35 psi through the barb fitting on the housing.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoost dependent controller with internal MAP sensor, 35 psi max\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eLarge, turn resistant knobs with large numbering to set the start and full activation points\u003c\/li\u003e\n\u003cli\u003eCovered status LED and test button for splash resistance\u003c\/li\u003e\n\u003cli\u003eBoost Safe failsafe output triggers on a short, loss of continuity, high or low voltage or low fluid\u003c\/li\u003e\n\u003cli\u003eColor coded harness with positive lock connector, integrated pump ground circuit and an extra wire for an optional on\/off solenoid\u003c\/li\u003e\n\u003cli\u003eIntegrated fuse and molded mounting tabs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eBoost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e35 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStandard controller\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410194135,"sku":"30-3304","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ccc505e26f8b967ed04810615716bb9f652fc56e.jpg?v=1795278527"},{"product_id":"aem-v3-water-methanol-hd-controller-kit-40-psi-controller-and-harness","title":"AEM V3 Water\/Methanol HD Controller Kit, 40 PSI (Controller and Harness)","description":"\u003cp\u003eThe AEM V3 HD boost dependent water\/methanol controller and wiring harness on their own. The internal MAP sensor is rated to 40 psi. Use it to replace a controller or to build an HD system around your own pump, tank and injectors.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD controller with internal MAP sensor, rated to 40 psi\u003c\/li\u003e\n\u003cli\u003eBarb fitting on the controller to connect the boost line\u003c\/li\u003e\n\u003cli\u003eSystem status LED on the controller\u003c\/li\u003e\n\u003cli\u003eColor coded harness for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eHD boost dependent, internal MAP sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum boost\u003c\/td\u003e\n\u003ctd\u003e40 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD controller\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410226903,"sku":"30-3306","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/6c6f490be14e34cf7176002d73a37345b27f4525_596411cf-3c6e-4cf2-ad3f-8d47d5638cb5.jpg?v=1795278527"},{"product_id":"aem-v3-water-methanol-multi-input-controller-kit-controller-and-harness","title":"AEM V3 Water\/Methanol Multi-Input Controller Kit (Controller and Harness)","description":"\u003cp\u003eThe AEM V3 Multi-Input water\/methanol controller and wiring harness on their own. Instead of an internal MAP sensor, this controller is triggered by a 0 to 5 V signal, a frequency or voltage MAF signal, injector duty cycle or an external MAP sensor, so it works on naturally aspirated and boosted engines.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMultiple trigger inputs to activate the system: 0 to 5 V, MAF frequency or voltage, duty cycle or external MAP\u003c\/li\u003e\n\u003cli\u003eWorks on naturally aspirated and boosted applications\u003c\/li\u003e\n\u003cli\u003eLED system status light\u003c\/li\u003e\n\u003cli\u003eColor coded harness for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3305\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003eMulti-Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e0 to 5 V, MAF frequency or voltage, duty cycle, external MAP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMulti-Input controller\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe external MAP or MAF sensor is not included.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410259671,"sku":"30-3305","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/06c5ee6f1887e8edd451c18bc38ca714a56db459_675b615b-ed44-4f11-a7f8-24c920d4d32d.jpg?v=1795278528"},{"product_id":"aem-v3-water-methanol-injector-kit","title":"AEM V3 Water\/Methanol Injector Kit","description":"\u003cp\u003eThe AEM V3 water\/methanol injector, the same one that comes in every AEM V3 kit. It is a direct replacement and upgrade for the V2 injector in older AEM systems. The Swirl Generator design improves atomization, which cools the inlet charge faster and uses less fluid to hold that cooling. Flow is set by swapping the Swirl Generator, and the whole injector comes apart with a single clip at the rear of the body.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwirl Generator technology increases atomization for faster cooling\u003c\/li\u003e\n\u003cli\u003eThree Swirl Generators included: 250, 500 and 1,000 cc\u003c\/li\u003e\n\u003cli\u003eDirect replacement and upgrade for the AEM V2 injector\u003c\/li\u003e\n\u003cli\u003eAll components held in place by a single clip for easy assembly and disassembly\u003c\/li\u003e\n\u003cli\u003eAluminum body, O-rings included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3315\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow\u003c\/td\u003e\n\u003ctd\u003e250, 500 or 1,000 cc depending on Swirl Generator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete injector assembly\u003c\/li\u003e\n\u003cli\u003eThree Swirl Generators\u003c\/li\u003e\n\u003cli\u003eT-fitting\u003c\/li\u003e\n\u003cli\u003eHose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410292439,"sku":"30-3315","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/e3e436bcd63d71111898e5afb1e5404ca426fd66.jpg?v=1795278528"},{"product_id":"aem-v3-water-methanol-hd-injector-kit-2-injectors","title":"AEM V3 Water\/Methanol HD Injector Kit (2 Injectors)","description":"\u003cp\u003eA pair of AEM V3 water\/methanol injectors for dual nozzle setups. Each injector comes with its own set of interchangeable Swirl Generators, and the T-adapter lets you feed both from one line for up to 2,000 cc of total flow.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo complete V3 injector assemblies\u003c\/li\u003e\n\u003cli\u003eInterchangeable Swirl Generators for 250, 500 and 1,000 cc of flow on each injector\u003c\/li\u003e\n\u003cli\u003eImproved atomizing design\u003c\/li\u003e\n\u003cli\u003eT-adapter included to run dual nozzles\u003c\/li\u003e\n\u003cli\u003eInject up to 2,000 cc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3313\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInjectors\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow per injector\u003c\/td\u003e\n\u003ctd\u003e250, 500 or 1,000 cc depending on Swirl Generator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo complete injector assemblies\u003c\/li\u003e\n\u003cli\u003eTwo sets of Swirl Generators\u003c\/li\u003e\n\u003cli\u003eT-adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410325207,"sku":"30-3313","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/7a03b6699681e91246f72308d6a679972a0c813e.png?v=1795278529"},{"product_id":"aem-water-methanol-injection-solenoid","title":"AEM Water\/Methanol Injection Solenoid","description":"\u003cp\u003eAEM's high flow, low current water\/methanol solenoid. It is a 2-way, normally closed 12 V valve with a stainless steel body that shuts the line off cleanly when the system is not spraying and stops fluid from siphoning into the engine under vacuum. AEM recommends it whenever the pump and tank are mounted higher than the nozzle.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAccurate, consistent shut off that prevents siphoning under vacuum\u003c\/li\u003e\n\u003cli\u003e2-way, normally closed 12 V valve\u003c\/li\u003e\n\u003cli\u003eStainless steel body\u003c\/li\u003e\n\u003cli\u003e2 wire connection\u003c\/li\u003e\n\u003cli\u003ePush lock fittings\u003c\/li\u003e\n\u003cli\u003eBackwards compatible with AEM water\/methanol controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2-way, normally closed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting holes\u003c\/td\u003e\n\u003ctd\u003e2 (mounting hardware not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410357975,"sku":"30-3326","price":132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/2790cb19b514a2d70755b9fa409219dec949d94a.jpg?v=1795278530"},{"product_id":"aem-water-methanol-injection-inline-filter-1-4-in","title":"AEM Water\/Methanol Injection Inline Filter, 1\/4 in.","description":"\u003cp\u003eAEM's inline water\/methanol filter catches particulates down to 40 microns before they reach the pump, injector and engine. It installs in the line between the tank and the pump and works on virtually any water\/methanol system that uses 1\/4 in. OD tubing. AEM recommends running one on every water\/methanol system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFilters down to 40 microns\u003c\/li\u003e\n\u003cli\u003eProtects the system from foreign particles\u003c\/li\u003e\n\u003cli\u003e1\/4 in. push lock fittings\u003c\/li\u003e\n\u003cli\u003eInstalls on the low pressure side of the system, between the tank and the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e40 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet and outlet\u003c\/td\u003e\n\u003ctd\u003e1\/4 in. push lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410390743,"sku":"30-3003","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/012a304fce14a0627b9620d6b4159ad7630cdf9b.jpg?v=1795278530"},{"product_id":"aem-water-methanol-injection-pump-200-psi-3-8-npt-ports","title":"AEM Water\/Methanol Injection Pump, 200 PSI, 3\/8 NPT Ports","description":"\u003cp\u003eAEM's 200 psi recirculation style water\/methanol pump with 3\/8 NPT ports, for systems plumbed with custom hard line or braided line instead of push lock tubing. It can be mounted in any position, horizontal or vertical.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 200 psi\u003c\/li\u003e\n\u003cli\u003eFlows 1 gallon per minute\u003c\/li\u003e\n\u003cli\u003e3\/8 NPT ports for custom hard line or braided line\u003c\/li\u003e\n\u003cli\u003eDirectional flow\u003c\/li\u003e\n\u003cli\u003eMounts in any position, horizontally or vertically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure\u003c\/td\u003e\n\u003ctd\u003eUp to 200 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow\u003c\/td\u003e\n\u003ctd\u003e1 gallon per minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003e3\/8 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410652887,"sku":"30-3018","price":230.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/50259f75e1b02cf149ee3e75bc2ab77bb8f6fb54.png?v=1795278614"},{"product_id":"aem-water-methanol-injection-pump-200-psi-1-4-in-push-lock","title":"AEM Water\/Methanol Injection Pump, 200 PSI, 1\/4 in. Push-Lock","description":"\u003cp\u003eThe AEM 200 psi recirculation style water\/methanol pump with integrated 1\/4 in. push lock hose connections. It is the replacement pump for AEM water\/methanol systems and a solid upgrade for other systems running 1\/4 in. tubing. The unit is sealed and weatherproofed and has its own mounting bracket.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealed and weatherproofed unit\u003c\/li\u003e\n\u003cli\u003eIntegrated push lock hose connections\u003c\/li\u003e\n\u003cli\u003eHigh flow in a compact package\u003c\/li\u003e\n\u003cli\u003eIntegrated bracket for easy mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure\u003c\/td\u003e\n\u003ctd\u003e200 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1\/4 in. push lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410685655,"sku":"30-3015","price":207.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/6c74a0780384b409e8082969763db4cbf9bf7bc7.jpg?v=1795278614"},{"product_id":"aem-water-methanol-injection-reservoir-1-15-gallon-with-fluid-level-sensor","title":"AEM Water\/Methanol Injection Reservoir, 1.15 Gallon with Fluid Level Sensor","description":"\u003cp\u003eThe AEM 1.15 gallon water\/methanol reservoir, the same compact tank that comes in the 30-3300 and 30-3350 kits. A conductive low fluid level sensor is built into the tank and uses a positive lock connector with wires color matched to the AEM harness. The conductive design avoids false readings caused by debris.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompact design for flexible mounting\u003c\/li\u003e\n\u003cli\u003eBuilt-in level sensor to warn of low fluid\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003cli\u003eLarge reservoir cap for easy refills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1.15 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLevel sensor\u003c\/td\u003e\n\u003ctd\u003eConductive, built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410718423,"sku":"30-3325","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/65c840dff8d7917e47ad0df8459b68bdb60a4f24.jpg?v=1795278614"},{"product_id":"aem-water-methanol-injection-tank-5-gallon-with-fluid-level-sensor","title":"AEM Water\/Methanol Injection Tank, 5 Gallon with Fluid Level Sensor","description":"\u003cp\u003eAEM's 5 gallon water\/methanol tank with a conductive fluid level sensor. It is universal, so it works with AEM kits and with third party systems, and it ships with the hardware needed to install it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 gallon capacity\u003c\/li\u003e\n\u003cli\u003eConductive fluid level sensor with flying lead\u003c\/li\u003e\n\u003cli\u003ePreinstalled 90 degree 1\/4 in. push lock fitting\u003c\/li\u003e\n\u003cli\u003eAll installation hardware included\u003c\/li\u003e\n\u003cli\u003eUniversal, works with third party systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e21 in. x 8 in. x 10 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\u003c\/td\u003e\n\u003ctd\u003e90 degree 1\/4 in. push lock, preinstalled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410751191,"sku":"30-3320","price":230.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/a848a4d5d0b80d3ab9b0c7d5848a78555295ec4b_fdb922b0-ecb6-4c03-ab87-67589617b836.jpg?v=1795278615"},{"product_id":"aem-v3-water-methanol-hose-kit-20-ft-of-1-4-in-nylon","title":"AEM V3 Water\/Methanol Hose Kit, 20 ft. of 1\/4 in. Nylon","description":"\u003cp\u003e20 feet of AEM 1\/4 in. black nylon water\/methanol injection hose. Use it to replace damaged line or to add length to an existing system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1\/4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNylon, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410783959,"sku":"30-3314","price":20.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/477b89ab90f0a89b8d8309946f9a2a50f9a984ec.jpg?v=1795278616"},{"product_id":"aem-wiring-harness-for-v3-multi-input-water-methanol-controller","title":"AEM Wiring Harness for V3 Multi-Input Water\/Methanol Controller","description":"\u003cp\u003ePlug and play replacement wiring harness for the AEM V3 Multi-Input water\/methanol controller. It fits the Multi-Input controller only.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for Multi-Input controller kits\u003c\/li\u003e\n\u003cli\u003eLong harness length to suit most vehicles\u003c\/li\u003e\n\u003cli\u003eColor coded wiring for easy installation\u003c\/li\u003e\n\u003cli\u003ePre-pinned connector, plug and play\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-3324\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eAEM V3 Multi-Input water\/methanol controller only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410816727,"sku":"30-3324","price":58.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/614ca2863e89affe83e5c4141219486dc476dbaa.jpg?v=1795278617"},{"product_id":"aem-water-methanol-reservoir-cap","title":"AEM Water\/Methanol Reservoir Cap","description":"\u003cp\u003eReplacement cap for AEM water\/methanol reservoirs. It fits both the 1.15 gallon and the 5 gallon AEM tanks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the AEM 1.15 gallon and 5 gallon reservoirs\u003c\/li\u003e\n\u003cli\u003eRidged design for grip when removing and installing the cap\u003c\/li\u003e\n\u003cli\u003eVented to let the fluid expand and contract while keeping a tight seal\u003c\/li\u003e\n\u003cli\u003eWide cap for easy refills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30-4508\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAEM 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":68184410849495,"sku":"30-4508","price":17.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/df0acf23f092cde73a9abe29a42809b6df7ebda4.jpg?v=1795278617"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/collections\/186557883fc7531bbeca650f43dcb041f8b0553c.jpg?v=1795278704","url":"https:\/\/billetproshop.com\/en-ca\/collections\/aem.oembed","provider":"Billet Pro Shop","version":"1.0","type":"link"}