{"title":"Injectors","description":"","products":[{"product_id":"2150cc-200-lbs-hr-at-43-5-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013-cobra-1999-2004-high-z","title":"2150cc FIC Fuel Injector Clinic Injector Set for Mustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) (High-Z)","description":"\u003cp data-mce-fragment=\"1\"\u003eMustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) Injector Set: 8 x 2150 cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability.Includes pigtails PGTDEN8 or add Plug \u0026amp; Play adaptors PADPDtoU8. Plug and Play Ford ECU Data available on our website.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/FordData\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/FordData\"\u003ehttp:\/\/fuelinjectorclinic.com\/FordData\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003edynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr data-mce-fragment=\"1\"\u003eEach injector is individually serial numbered and the results are provided on the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eproviding the most complete flow matching and latency value information available in the industry today.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery injector is covered against failure caused by defects in original manufacture by our 12 month warranty.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Plug and play adapter ($90)","offer_id":39487604162742,"sku":"IS403-2150H+adp","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"Solder-in pigtails","offer_id":39487604195510,"sku":"IS403-2150H","price":1630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/2150cc-200-lbshr-at-435-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013cobra-1999-2004-high--385876.jpg?v=1668734280"},{"product_id":"1650cc-160-lbs-hr-at-43-5-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013-cobra-1999-2004-high-z","title":"1650cc FIC Fuel Injector Clinic Injector Set for Mustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) (High-Z)","description":"\u003cp data-mce-fragment=\"1\"\u003eMustang GT '86-'15 Fuel Injector Clinic Injector Set: 8 x 1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match TechnologyThis injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required!\u003cbr data-mce-fragment=\"1\"\u003ePlug and Play Ford ECU Data Available at\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/FordData\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/FordData\"\u003ehttp:\/\/fuelinjectorclinic.com\/FordData\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eproviding the most complete flow matching and latency value information available in the industry today.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 120ºF (49°C) fuel temperature using 93 Octane, 10% E pump gasoline.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":39488015171766,"sku":"IS403-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/1650cc-160-lbshr-at-435-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013cobra-1999-2004-high--197062.jpg?v=1668734275"},{"product_id":"1440cc-140-lbs-hr-at-43-5-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013-cobra-1999-2004-high-z","title":"1440cc FIC Fuel Injector Clinic Injector Set for Mustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) (High-Z)","description":"\u003cp data-mce-fragment=\"1\"\u003e1440cc Ford Mustang GT (05-16)\/GT350 (15-16)\/ Boss 302 (12-13)\/Cobra (99-04) FIC's Data Matched high performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eproviding the most complete flow matching and latency value information available in the industry today.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":39488036864182,"sku":"IS403-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/1440cc-140-lbshr-at-435-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013cobra-1999-2004-high--341797.jpg?v=1668734135"},{"product_id":"1200cc-110-lbs-hr-at-43-5-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013-cobra-1999-2004-high-z","title":"1200cc FIC Fuel Injector Clinic Injector Set for Mustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) (High-Z)","description":"\u003cp data-mce-fragment=\"1\"\u003eFord Mustang GT (2005-2016)\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) Fuel Injector Clinic Injector Set: 8 x 1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure. Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Includes pigtails PGTJET8Q or add Plug \u0026amp; Play adaptors PADPJtoU8.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese injectors utilize the latest technology and provide great linearity and short pulse width repeatability. PREVIOUSLY IS403-1100H.\u003cbr data-mce-fragment=\"1\"\u003ePlug and Play Ford ECU Data Available at\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/FordData\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/FordData\"\u003ehttp:\/\/fuelinjectorclinic.com\/FordData\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eproviding the most complete flow matching and latency value information available in the industry today.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Plug and play adapter ($90)","offer_id":39488055247030,"sku":"IS403-1200H-adp","price":1167.0,"currency_code":"USD","in_stock":true},{"title":"Solder-in pigtails","offer_id":39488055279798,"sku":"IS403-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/1200cc-110-lbshr-at-435-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013cobra-1999-2004-high--693740.jpg?v=1668734128"},{"product_id":"1000cc-95-lbs-hr-at-43-5-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013-cobra-1999-2004-high-z","title":"1000cc FIC Fuel Injector Clinic Injector Set for Mustang GT (2005-2016 )\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) (High-Z)","description":"\u003cp\u003eFord Mustang GT (2005-2016)\/GT350 (2015-2016)\/ Boss 302 (2012-2013)\/Cobra (1999-2004) Fuel Injector Clinic Injector Set: 8 x 1000cc\/min (95lbs\/hr) at 3 bar (43.5psi) fuel pressure. Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Drop-in for size and plug.\u003c\/p\u003e\n\u003cp\u003eThese injectors utilize the latest technology and provide great linearity and short pulse width repeatability.\u003cbr\u003ePlug and Play Ford ECU Data Available at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/FordData\"\u003ehttp:\/\/fuelinjectorclinic.com\/FordData\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/data-match-technology\" target=\"_blank\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\" onclick=\"window.open(this.href, 'SampleDataMatchSheet', 'resizable=yes,status=no,location=no,toolbar=no,menubar=no,fullscreen=no,scrollbars=no,dependent=no,width=500,height=700'); return false;\"\u003e\u003cspan\u003eData Match Sheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eproviding the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":39488124158134,"sku":"IS403-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/1000cc-95-lbshr-at-435-psi-fuel-pressure-fic-fuel-injector-clinic-injector-set-for-mustang-gt-2005-2016-gt350-2015-2016-boss-302-2012-2013cobra-1999-2004-high-z-382317.jpg?v=1668734159"},{"product_id":"v8-over-manifold-bosch-style-injector-harness","title":"V8 Over Manifold, Bosch Style Injector Harness","description":"\u003cspan data-mce-fragment=\"1\"\u003eV8 over Manifold, Bosch Style Connector Harness for Avenger EFI, HP EFI \u0026amp; Dominator EFI\u003c\/span\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":39771370029238,"sku":"558-200","price":184.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/v8-over-manifold-bosch-style-injector-harness-518166.jpg?v=1668734517"},{"product_id":"injector-driver-module-w-harness","title":"Injector Driver Module, W\/ Harness","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eIntroducing the Holley EFI Programmable 8 Channel Injector Driver Module. The ultimate solution for methanol burning engines that require a large set of secondary injectors. The Holley EFI Injector Driver Module will have you in complete control of your fuel injected behemoth, featuring easily programmable injector current curves, injector test fire mode, two datalogger outputs, multiple peak and hold current settings and more. This module will allow you to expand the capabilities of your current Electronic Fuel Injected Engine, keeping you at the front of the field!\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered specifically to add a secondary set of high peak current injectors when utilizing a Holley EFI Dominator ECU\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be triggered by either negative or positive trigger to ease install in all EFI applications, be it a stock or aftermarket ECU\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEight easily programmable channels for precise injector control\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to wire Tyco Super Seal Connector\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEight pre-programmed injector current curves\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak current settings from 4A to 10A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHold current settings from 1A to 2.5A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak hold duration settings from .5 to 1.0ms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInjector test fire program for quick troubleshooting while in the field\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8 RGB LEDs indicate proper operation as well as log faults\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwo outputs (Ground and 0-5V) can be run to an ECU to datalog any injector faults\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePre-Programmed in Position 7 for Billet Atomizer 325-800 or Precision 500 Lb\/Hr Injectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":39771521712310,"sku":"554-142","price":570.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/injector-driver-module-w-harness-251693.jpg?v=1668734288"},{"product_id":"ford-v8-injector-harness","title":"Ford V8 Injector Harness","description":"\u003cspan data-mce-fragment=\"1\"\u003eFord V8 Injector Harness for Ford USCAR \/ EV6 style Fuel Injectors (Evenly Spaced)\u003c\/span\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":39782498926774,"sku":"558-212","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/products\/ford-v8-injector-harness-919951.jpg?v=1668734292"},{"product_id":"ft-injector-520-lb-h","title":"FT Injector 520 lb\/h","description":"\u003cul class=\"tabs\"\u003e\u003c\/ul\u003e\n\u003cp\u003eThe FT Injector 520 lb\/hr (3,822 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injector Driver product page\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e or \u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\" title=\"FuelTech FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_LOW_IMPEDANCE.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eInjector: 86 x 32 mm\u003c\/li\u003e\n\u003cli\u003ePacking: 223 x 162 x 60 mm\u003c\/li\u003e\n\u003cli\u003eShipping packaging dimensions: 225 x 250 x 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e 160g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44054450864343,"sku":"5010107881","price":379.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44054450897111,"sku":"5010107881-4","price":1516.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44054450929879,"sku":"5010107881-8","price":3032.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Individual","offer_id":44054450962647,"sku":"5010108245","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":44054450995415,"sku":"5010108245-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":44054451028183,"sku":"5010108245-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":44054451060951,"sku":"5010108244","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":44054451093719,"sku":"5010108244-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":44054451126487,"sku":"5010108244-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Individual","offer_id":48441859801303,"sku":"5010108249","price":415.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Set of 4","offer_id":48441859834071,"sku":"5010108249-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Set of 8","offer_id":48441859866839,"sku":"5010108249-8","price":3320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-520-lbhfueltech-4676911.jpg?v=1775100371"},{"product_id":"ft-injector-820-lb-h","title":"FT Injector 820 lb\/h","description":"\u003cp\u003eThe FT Injector 820 lb\/hr (5,880 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injection Driver product page\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e or \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"FuelTech FT Injector Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_LOW_IMPEDANCE.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eInjector: 86 x 32 mm\u003c\/li\u003e\n\u003cli\u003ePacking: 223 x 162 x 60 mm\u003c\/li\u003e\n\u003cli\u003eShipping packaging dimensions: 225 x 250 x 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e 160g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?rel=0\u0026amp;showinfo=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44054451552471,"sku":"5010109129","price":439.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44054451585239,"sku":"5010109129-4","price":1756.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44054451618007,"sku":"5010109129-8","price":3512.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":48441860260055,"sku":"5010109109","price":475.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":48441860292823,"sku":"5010109109-4","price":1900.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":48441860325591,"sku":"5010109109-8","price":3800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-820-lbhfueltech-5634279.jpg?v=1775100371"},{"product_id":"ft-injector-170-lb-h","title":"FT Injector 170 lb\/h","description":"\u003cul class=\"tabs\"\u003e\u003c\/ul\u003e\n\u003cp\u003eThe FT Injector 170 lb\/hr (1785cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-80-120-170-240.pdf\" title=\"FuelTech FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_EV1.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCoil resistance: (8.2 - 8.1) Ohms\u003c\/li\u003e\n\u003cli\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1 - Overall height - 74 mm (2.91”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e2 - Overall width - 18 mm (0.71”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e3 - Top O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4 - Tip - 4.1 mm (0.16”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5 - Bottom O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441861374167,"sku":"5010110882","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441861406935,"sku":"5010110882-4","price":876.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441861439703,"sku":"5010110882-8","price":1752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-170-lbhfueltech-7657597.jpg?v=1775100372"},{"product_id":"ft-injector-720-lb-h","title":"FT Injector 720 lb\/h","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe FT Injector 720 lb\/hr (5,449 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injector Driver product page\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e or \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\" title=\"FuelTech FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_LOW_IMPEDANCE.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\"\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eInjector: 86 x 32 mm\u003c\/li\u003e\n\u003cli\u003ePacking: 223 x 162 x 60 mm\u003c\/li\u003e\n\u003cli\u003eShipping packaging dimensions: 225 x 250 x 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e 160g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44054451683543,"sku":"5010107883","price":419.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44054451716311,"sku":"5010107883-4","price":1676.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44054451749079,"sku":"5010107883-8","price":3352.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Individual","offer_id":44054451781847,"sku":"5010108235","price":455.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":44054451814615,"sku":"5010108235-4","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":44054451847383,"sku":"5010108235-8","price":3640.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":44054451880151,"sku":"5010108234","price":455.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":44054451912919,"sku":"5010108234-4","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":44054451945687,"sku":"5010108234-8","price":3640.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Individual","offer_id":44054451978455,"sku":"5010108238","price":455.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Set of 4","offer_id":44054452011223,"sku":"5010108238-4","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Set of 8","offer_id":44054452043991,"sku":"5010108238-8","price":3640.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Individual","offer_id":48441859604695,"sku":"5010108239","price":455.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Set of 4","offer_id":48441859637463,"sku":"5010108239-4","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"-4AN\/-6ORB \/ Set of 8","offer_id":48441859670231,"sku":"5010108239-8","price":3640.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Individual","offer_id":44054452175063,"sku":"5010108237","price":455.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Set of 4","offer_id":44054452207831,"sku":"5010108237-4","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Set of 8","offer_id":44054452240599,"sku":"5010108237-8","price":3640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-720-lbhfueltech-8340445.jpg?v=1775100374"},{"product_id":"billet-atomizer-3-injector","title":"Billet Atomizer 3 Injector","description":"\u003cp\u003e\u003cstrong\u003eImpedence\u003c\/strong\u003e: Low (1.6 Ohm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Pressure Rating\u003c\/strong\u003e: 160-325# @ 43.5 psi, 500-850# @ 90 psi\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpray Pattern\u003c\/strong\u003e: Wide Atomization\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e: Jetronic \/ Minitimer (rectangle shaped) EV1\u003c\/p\u003e\n\u003cp\u003eExtended tip is 5mm longer than standard injectors\u003c\/p\u003e\n\u003cp\u003eStandard fuel rail bore 14mm, 60mm length\u003c\/p\u003e\n\u003cp\u003eBody width: 28mm  – for more detailed dimensions,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1sZpzbrjxBLLmyu1CHz9K1WPdKdoIcPYY\/view?usp=share_link\"\u003eclick here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePrice is for a single injector.\u003c\/p\u003e\n\u003cp\u003eBUILT TO ORDER (for replacements)\u003c\/p\u003e","brand":"Billet Atomizer","offers":[{"title":"225 PPH","offer_id":45877447885015,"sku":"","price":482.0,"currency_code":"USD","in_stock":true},{"title":"550 PPH","offer_id":45877447917783,"sku":"","price":482.0,"currency_code":"USD","in_stock":true},{"title":"700 PPH","offer_id":45877447950551,"sku":"","price":482.0,"currency_code":"USD","in_stock":true},{"title":"800 PPH","offer_id":45877447983319,"sku":"","price":482.0,"currency_code":"USD","in_stock":true},{"title":"850 PPH","offer_id":45877448016087,"sku":"","price":482.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/billet-atomizer-3-injectorbillet-atomizer-320208.jpg?v=1732664155"},{"product_id":"90-degree-injector-boot","title":"90 Degree Injector Boot","description":"\u003cp\u003eAdd these injector boots to your custom harness to protect the wiring and for a clean installation.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e*Injector connector not included.\u003c\/i\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":47756438110423,"sku":"5011100166","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injectorboot.png?v=1775077837"},{"product_id":"ev1-injector-connector-kit","title":"EV1 Injector Connector Kit","description":"\u003cp\u003eUse this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation.\u003c\/p\u003e\n\u003cp\u003eKit Includes: EV1 injector connector, (2) terminals, and a 90 degree boot.\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":47756438864087,"sku":"5011100167","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ev1kit.png?v=1775077840"},{"product_id":"ev6-ev14-injector-connector-kit","title":"EV6\/EV14 Injector Connector Kit","description":"\u003cp\u003eUse this kit when building a custom harness while using injectors with EV6\/EV14 connectors.\u003c\/p\u003e\n\u003cp\u003eKit Includes: EV6\/EV14 injector connector, (2) terminals, (2) seals.\u003c\/p\u003e\n\u003cem\u003e*To be used with \u003ca href=\"https:\/\/www.fueltech.net\/products\/injector-dynamics\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInjector Dynamics\u003c\/a\u003e injectors\u003c\/em\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":47756438831319,"sku":"5011100246","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ev6_ev14kit.png?v=1775077888"},{"product_id":"nippon-denso-injector-connector-kit","title":"Nippon Denso Injector Connector Kit","description":"\u003cp\u003eUse this kit when building a custom harness while using injectors with Nippon Denso connectors.\u003c\/p\u003e\n\u003cp\u003eKit Includes: Nippon Denso injector connector, (2) terminals, (2) seals.\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":47756439945431,"sku":"5011100250","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/nippondensokit.png?v=1775077889"},{"product_id":"peak-and-hold-2a-0-5a-driver","title":"Peak \u0026 Hold 2A\/0.5A Injector Driver","description":"\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003eFuelTech’s Peak \u0026amp; Hold 2A\/0.5A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance between 3 and 7 ohms. The mounting kit is included.\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/PH_trilingue.pdf\" title=\"Peak and Hold Manual\" target=\"_blank\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/Download_Icons-01_46a273cc-34d8-445f-a359-74bf61fa7a1c_large.jpg?v=1517420591\" alt=\"\"\u003e \u003c\/span\u003ePeak and Hold Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e\u003ca href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" title=\"8A\/2A\" target=\"_blank\"\u003e8A\/2A\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" title=\"4A\/1A\" target=\"_blank\"\u003e4A\/1A\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e2A\/0.5A (Currently Viewing)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003eTechnical Description\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003ca href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" title=\"Peak and Hold 8A\/2A\" target=\"_blank\"\u003ePeak and Hold 8A\/2A\u003c\/a\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e8 FT Injectors\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ca href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" title=\"Peak and Hold 4A\/1A\" target=\"_blank\"\u003ePeak and Hold 4A\/1A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePeak and Hold 2A\/0.5A (Currently Viewing)\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTo determine which Peak \u0026amp; Hold you need\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGrab a multi-meter and select Ohms 200\u003c\/li\u003e\n\u003cli\u003eTouch the positive and negative leads of multi-meter together to measure resistance (record this number...i.e. measured 0.3)\u003c\/li\u003e\n\u003cli\u003eThen take the positive and negative leads from multi-meter and put on each terminal of the injector. Doesn't matter the order. Record this measurement\u003c\/li\u003e\n\u003cli\u003eTake the ohms measurement from Step 3 and then subtract the number you got in Step 2 (i.e. Step 3 4.8ohms - Step 2 0.3ohms = Total 4.5ohms)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eHigh Impedance Injectors - Above 7ohms\u003c\/b\u003e - No Peak and Hold Boxes are needed.\u003cbr\u003e\u003cb\u003ePeak and Hold 2A\u003c\/b\u003e\u003cspan\u003e - 3ohms to 7ohms (Bosch 160lb\/hr).\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 4A\u003c\/b\u003e\u003cspan\u003e - Below 3ohms to 1.5ohms.\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 8A\u003c\/b\u003e\u003cspan\u003e - Below 1.5ohms (FT Injector, Billet Atomizer*).\u003cbr\u003eAll low impedance Billet Atomizer Injectors manufactured after Nov. 2012 require 8A regardless of measured resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e*Billet Atomizer Injectors - Anything prior to serial # C300**** should only use the 4A\/1A. This only applies to injectors manufactured prior to Nov. 2012.\u003cbr\u003e \u003c\/i\u003e\u003cuul\u003e \u003c\/uul\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003eContents of Packaging\u003c\/h4\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 Peak and Hold 2A\/0.5A\u003c\/li\u003e\n\u003cli\u003e1 Operation and installation guide\u003c\/li\u003e\n\u003cli\u003e1 mounting kit (4 rubber mounts, 4 washers and 4 ¼” nuts)\u003c\/li\u003e\n\u003cli\u003e6ft Peak and Hold unterminated harness (optional)\u003c\/li\u003e\n\u003cli\u003e1 FuelTech black carbon fiber sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\n\u003cdiv class=\"animate_up center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KLQvvnvMYmA?rel=0\u0026amp;showinfo=0\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":48441853018327,"sku":"3010003323","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":48441853051095,"sku":"3010003323 \/ 2001000044","price":268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/pnh2a_1.jpg?v=1775077711"},{"product_id":"peak-and-hold-4a-1a-driver","title":"Peak \u0026 Hold 4A\/1A Injector Driver","description":"\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca href=\"#tab1\" class=\"active\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003eFuelTech’s Peak \u0026amp; Hold 4A\/1A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance between 1.5 to 3 ohms. The mounting kit is included. \u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\u003ca title=\"Peak and Hold manual\" href=\"https:\/\/files.fueltech.net\/manuals\/PH_trilingue.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/Download_Icons-01_46a273cc-34d8-445f-a359-74bf61fa7a1c_large.jpg?v=1517420591\"\u003e \u003c\/span\u003ePeak and Hold Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e\u003ca title=\"8A\/2A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" target=\"_blank\"\u003e8A\/2A\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e4A\/1A\u003c\/b\u003e\u003cstrong\u003e (Currently Viewing)\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\"\u003e2A\/0.5A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003eTechnical Description\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003ca title=\"Peak and Hold 8A\/2A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" target=\"_blank\"\u003ePeak and Hold 8A\/2A\u003c\/a\u003e \u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e8 FT Injectors\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003ePeak and Hold 4A\/1A (Currently Viewing)\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ca title=\"Peak and Hold 2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\"\u003ePeak and Hold 2A\/0.5A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTo determine which Peak \u0026amp; Hold you need\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGrab a multi-meter and select Ohms 200\u003c\/li\u003e\n\u003cli\u003eTouch the positive and negative leads of multi-meter together to measure resistance (record this number...i.e. measured 0.3)\u003c\/li\u003e\n\u003cli\u003eThen take the positive and negative leads from multi-meter and put on each terminal of the injector. Doesn't matter the order. Record this measurement\u003c\/li\u003e\n\u003cli\u003eTake the ohms measurement from Step 3 and then subtract the number you got in Step 2 (i.e. Step 3 4.8ohms - Step 2 0.3ohms = Total 4.5ohms)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eHigh Impedance Injectors - Above 7ohms\u003c\/b\u003e - No Peak and Hold Boxes are needed.\u003cbr\u003e\u003cb\u003ePeak and Hold 2A\u003c\/b\u003e\u003cspan\u003e - 3ohms to 7ohms (Bosch 160lb\/hr).\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 4A\u003c\/b\u003e\u003cspan\u003e - Below 3ohms to 1.5ohms.\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 8A\u003c\/b\u003e\u003cspan\u003e - Below 1.5ohms (FT Injector, Billet Atomizer*).\u003cbr\u003eAll low impedance Billet Atomizer Injectors manufactured after Nov. 2012 require 8A regardless of measured resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e*Billet Atomizer Injectors - Anything prior to serial # C300**** should only use the 4A\/1A. This only applies to injectors manufactured prior to Nov. 2012.\u003cbr\u003e \u003c\/i\u003e\u003cuul\u003e \u003c\/uul\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003eContents of Packaging\u003c\/h4\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 Peak and Hold 4A\/1A\u003c\/li\u003e\n\u003cli\u003e1 Operation and installation guide\u003c\/li\u003e\n\u003cli\u003e1 mounting kit (4 rubber mounts, 4 washers and 4 ¼” nuts)\u003c\/li\u003e\n\u003cli\u003e6ft Peak and Hold unterminated harness (optional)\u003c\/li\u003e\n\u003cli\u003e1 FuelTech black carbon fiber sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\n\u003cdiv class=\"animate_up center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/KLQvvnvMYmA?rel=0\u0026amp;showinfo=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"autoplay; encrypted-media\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":48441853083863,"sku":"3010003324","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":48441853116631,"sku":"3010003324 \/ 2001000044","price":268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/pnh4a_1.jpg?v=1775077713"},{"product_id":"peak-and-hold-8a-2a-driver","title":"Peak \u0026 Hold 8A\/2A Injector Driver","description":"\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca href=\"#tab1\" class=\"active\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003eFuelTech’s Peak \u0026amp; Hold 8A\/2A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance below 1.5 ohm. Designed for use with low impedance fuel injectors. Mounting kit included. \u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\u003ca title=\"Peak and Hold Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/PH_trilingue.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/Download_Icons-01_46a273cc-34d8-445f-a359-74bf61fa7a1c_large.jpg?v=1517420591\"\u003e \u003c\/span\u003ePeak and Hold Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e\u003cb\u003e8A\/2A\u003c\/b\u003e\u003cstrong\u003e (Currently Viewing)\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\"\u003e4A\/1A\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\"\u003e2A\/0.5A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003eTechnical Description\u003c\/h3\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003ePeak and Hold 8A\/2A (Currently Viewing)\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e4 FT Injectors (1 per channel)\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"Peak and Hold 4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\"\u003ePeak and Hold 4A\/1A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"Peak and Hold 2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\"\u003ePeak and Hold 2A\/0.5A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eTo determine which Peak \u0026amp; Hold you need\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGrab a multi-meter and select Ohms 200\u003c\/li\u003e\n\u003cli\u003eTouch the positive and negative leads of multi-meter together to measure resistance (record this number...i.e. measured 0.3)\u003c\/li\u003e\n\u003cli\u003eThen take the positive and negative leads from multi-meter and put on each terminal of the injector. Doesn't matter the order. Record this measurement\u003c\/li\u003e\n\u003cli\u003eTake the ohms measurement from Step 3 and then subtract the number you got in Step 2 (i.e. Step 3 4.8ohms - Step 2 0.3ohms = Total 4.5ohms)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eHigh Impedance Injectors - Above 7ohms\u003c\/b\u003e - No Peak and Hold Boxes are needed.\u003cbr\u003e\u003cb\u003ePeak and Hold 2A\u003c\/b\u003e\u003cspan\u003e - 3ohms to 7ohms (Bosch 160lb\/hr).\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 4A\u003c\/b\u003e\u003cspan\u003e - Below 3ohms to 1.5ohms.\u003cbr\u003e\u003c\/span\u003e\u003cb\u003ePeak and Hold 8A\u003c\/b\u003e\u003cspan\u003e - Below 1.5ohms (FT Injector, Billet Atomizer*).\u003cbr\u003eAll low impedance Billet Atomizer Injectors manufactured after Nov. 2012 require 8A regardless of measured resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e*Billet Atomizer Injectors - Anything prior to serial # C300**** should only use the 4A\/1A. This only applies to injectors manufactured prior to Nov. 2012.\u003cbr\u003e\u003c\/i\u003e\u003cuul\u003e \u003c\/uul\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003eContents of Packaging\u003c\/h4\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 Peak and Hold 8A\/2A\u003c\/li\u003e\n\u003cli\u003e1 Operation and installation guide\u003c\/li\u003e\n\u003cli\u003e1 mounting kit (4 rubber mounts, 4 washers and 4 ¼” nuts)\u003c\/li\u003e\n\u003cli\u003e6ft Peak and Hold unterminated harness (optional)\u003c\/li\u003e\n\u003cli\u003e1 FuelTech black carbon fiber sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\n\u003cdiv class=\"animate_up center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4e8FGPc7g4A?si=K8d-c526lCEIEJRP\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/KLQvvnvMYmA?rel=0\u0026amp;showinfo=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"autoplay; encrypted-media\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":48441853149399,"sku":"3010003325","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":48441853182167,"sku":"3010003325 \/ 2001000044","price":268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/pnh8a_1.jpg?v=1775077715"},{"product_id":"pro600-v8-secondary-injector-harness","title":"FT600 PRO V8 Secondary Injector Harness","description":"The FuelTech PRO600 Secondary Injector harness is designed as a true plug and play expansion to complement the PRO600 V8 harness. With this expansion harness the user can expand to a total of 16 fully sequential injectors with simple pre-terminated connections. The harness is fitted with a 24 position CPC firewall connection making adding a second set of injectors a breeze! The harness includes a single 30amp relay and fuse protection, two connections for peak and hold driver’s and is set up to suit EV1 style injectors.\nThe PRO600 Secondary Injector harness has a label for each connector and the insulation is heat, moisture and oil resistant.\n\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor use with 16 injector applications\u003c\/li\u003e\n\u003cli\u003eEV1 Injector connector\u003c\/li\u003e\n\u003cli\u003ePlug n’ Play design compatible with PRO600 Harness\u003c\/li\u003e\n\u003cli\u003eUses PRO600 Outputs Connector A (Blue Wires)\u003c\/li\u003e\n\u003cli\u003eIncludes: 8 injector connectors, Fuse, Relay, Auxiliary power connector (power from battery), 12-way Connector for connection with ECU Peak and Hold Pro connector and CPC Connector for firewall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePlease contact us with any questions to confirm compatibility with your setup.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":48441855738071,"sku":"2002109220","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/pro600secondaryv8harness2.png?v=1775077815"},{"product_id":"ft-injector-oring-replacement-upper","title":"FT Injector O-Ring Replacement","description":"\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpper - \u003cspan data-mce-fragment=\"1\"\u003e(7.52 x 3.53)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLower - \u003cspan data-mce-fragment=\"1\"\u003e(7.59 x 2.62)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach Low Impedance FT Injector (320 lb\/h, 520 lb\/h, 720 lb\/hr \u0026amp; 820lb\/h) fits one upper o'ring and two lower o'rings.\u003c\/p\u003e\n\u003cp\u003eEach High Impedance FT Injector (170 lb\/h \u0026amp; 240 lb\/h) fits two upper o'rings.\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Upper","offer_id":48441859047639,"sku":"5010100460","price":3.0,"currency_code":"USD","in_stock":true},{"title":"Lower","offer_id":48441859080407,"sku":"5010100461","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-o-ring-replacementfueltech-8111665.png?v=1775099527"},{"product_id":"ft-injector-320-lb-h","title":"FT Injector 320 lb\/h","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe FT Injector 320 lb\/hr (2,226 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech Peak \u0026amp; Hold 8A\/2A Injector Driver product page\" style=\"font-size: 0.875rem;\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\" style=\"font-size: 0.875rem;\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"FuelTech FT Injector Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_LOW_IMPEDANCE.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_1024x1024.png?v=1723840241\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eInjector: 86 x 32 mm\u003c\/li\u003e\n\u003cli\u003ePacking: 223 x 162 x 60 mm\u003c\/li\u003e\n\u003cli\u003eShipping packaging dimensions: 225 x 250 x 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e 160g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e\n\u003cdiv class=\"youtube-container\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":48441859899607,"sku":"5010108504","price":279.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":48441859932375,"sku":"5010108504-4","price":1116.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":48441859965143,"sku":"5010108504-8","price":2232.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Individual","offer_id":48441859997911,"sku":"5010108747","price":319.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":48441860030679,"sku":"5010108747-4","price":1276.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":48441860063447,"sku":"5010108747-8","price":2552.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":48441860096215,"sku":"5010108749","price":319.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":48441860128983,"sku":"5010108749-4","price":1276.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":48441860161751,"sku":"5010108749-8","price":2552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/WhatsAppImage2022-04-01at14.37.17_1.jpg?v=1775078013"},{"product_id":"peak-hold-pro-driver","title":"Peak \u0026 Hold PRO Injector Driver","description":"\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003eFuelTech’s Peak \u0026amp; Hold PRO Injector Driver is designed to control low impedance fuel injectors at a professional level, featuring 8 channels, 26-way automotive connector, and several integrated motor protections in case an injector or connection fails. It is capable of delivering 2 to 12 Amps of software-selected current per channel and has an internal temperature sensor, fault diagnosis, and protection against high temperature. The module is housed in an anodized aluminum and plastic case. Firmware updates available through CAN bus communication.\u003c\/li\u003e\n\u003cli class=\"active\"\u003eTo upgrade to the Peak \u0026amp; Hold PRO from another FuelTech Peak \u0026amp; Hold injector driver, use the \u003ca href=\"https:\/\/www.fueltech.net\/collections\/adapters-misc\/products\/peak-hold-pro-y-adapter-harness?_pos=7\u0026amp;_sid=696bc1ad8\u0026amp;_ss=r\" title=\"Peak \u0026amp; Hold PRO Y Adapter Harness product page\"\u003ePeak \u0026amp; Hold PRO Y Adapter Harness\u003c\/a\u003e to easily install without replacing wiring. \u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/Manual_Injector_Driver.pdf\" title=\"Peak and Hold Manual\" rel=\"noopener\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/Download_Icons-01_46a273cc-34d8-445f-a359-74bf61fa7a1c_large.jpg?v=1517420591\" alt=\"\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-Peak-and-Hold-PRO-Injector-Driver-Manual.pdf?v=1726574838\" title=\"Peak and Hold Manual\" rel=\"noopener\" target=\"_blank\"\u003e \u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/Peak_and_hold_PRO_Injector_driver.pdf\" title=\"Peak and Hold Manual\" rel=\"noopener\" target=\"_blank\"\u003ePeak and Hold PRO Injector Driver Manual\u003c\/a\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/Manual_Injector_Driver.pdf\" title=\"Peak and Hold Manual\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003ePeak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or connection fails.\u003c\/p\u003e\n\u003cp\u003eIn general, racing high-flow injectors use low impedance internal coils (with less than 7 Ohms resistance). That allows them to have a much shorter response time than a high impedance injector.\u003c\/p\u003e\n\u003cp\u003eThese lower impedance coils require a current control, starting with a higher current at opening stage (peak) and lower current when opened (hold), otherwise the injector can quickly warm up and burn.\u003c\/p\u003e\n\u003cp\u003eWith PRO Injector Driver it is possible to apply a higher initial current, allowing quick opening of the injector and then reduce the current to, in general, 1⁄4 the peak current.\u003c\/p\u003e\n\u003cp\u003eTherefore, reducing injector’s deadtime (time between the injector gets energized and effectively sprays fuel). \u003c\/p\u003e\n\u003cp\u003eInstallation requires \u003ca href=\"https:\/\/www.fueltech.net\/collections\/wiring\/products\/peak-hold-pro-harness?_pos=5\u0026amp;_sid=0ad5aa96d\u0026amp;_ss=r\" title=\"Peak \u0026amp; Hold PRO Wiring Harness product page.\"\u003ePeak \u0026amp; Hold PRO Wiring Harness\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"twelve columns offset-by-two center alpha\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 channels\u003c\/li\u003e\n\u003cli\u003e2 to 12 Amps (Software selected current, by channel)\u003c\/li\u003e\n\u003cli\u003e0.5 to 3 Amps (Software selected current, by channel)\u003c\/li\u003e\n\u003cli\u003eAutomotive connector\u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor\u003c\/li\u003e\n\u003cli\u003eFault diagnosis (CAN)\u003c\/li\u003e\n\u003cli\u003eProtection against high temperature\u003c\/li\u003e\n\u003cli\u003eOutput for activating the injectors relay\u003c\/li\u003e\n\u003cli\u003eAluminum case\u003c\/li\u003e\n\u003cli\u003eAllows firmware update through CAN\u003c\/li\u003e\n\u003cli\u003eStandalone\u003c\/li\u003e\n\u003cli\u003eDimension: 3.54” x 1.77” x: 4.5”\u003c\/li\u003e\n\u003cli\u003eMaterial: Anodized Aluminum and Plastic\u003c\/li\u003e\n\u003cli\u003eWarranty: Worldwide 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RFwV506mvBQ?si=qgBwiMuA9Pk1gUOd\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_1s0XlPAaL0?si=ZEAG0xsfQIjHuv9L\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":48441860358359,"sku":"3010008062","price":449.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":48441860391127,"sku":"3010008062 \/ 2001007186","price":578.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/PHPRO.png?v=1775078022"},{"product_id":"ft-injector-240-lb-h","title":"FT Injector 240 lb\/h","description":"\u003cul class=\"tabs\"\u003e\u003c\/ul\u003e\n\u003cp\u003eThe FT Injector 240 lb\/hr (2520cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-80-120-170-240.pdf\" title=\"FuelTech FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_EV1.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCoil resistance: (8.2 - 8.1) Ohms\u003c\/li\u003e\n\u003cli\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1 - Overall height - 74 mm (2.91”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e2 - Overall width - 18 mm (0.71”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e3 - Top O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4 - Tip - 4.1 mm (0.16”) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5 - Bottom O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 FT Injector\u003c\/li\u003e\n\u003cli\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARRANTY:\u003c\/strong\u003e 90 days \u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441861963991,"sku":"5010110883","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441861996759,"sku":"5010110883-4","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441862029527,"sku":"5010110883-8","price":1992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-240-lbhfueltech-3122631.jpg?v=1775099532"},{"product_id":"ft-injector-80-lb-h","title":"FT Injector 80 lb\/h","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul class=\"tabs\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp\u003eThe FT Injector 80 lb\/hr (840 cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"FuelTech FT Injector Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-80-120-170-240.pdf\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_EV1.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoil resistance: (\u003cspan data-mce-fragment=\"1\"\u003e8.2 - 8.1\u003c\/span\u003e) Ohms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e1 - Overall height - \u003cspan data-mce-fragment=\"1\"\u003e74 mm (2.91”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e2 - Overall width - \u003cspan data-mce-fragment=\"1\"\u003e18 mm (0.71”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e3 - Top O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e4 - Tip - \u003cspan data-mce-fragment=\"1\"\u003e4.1 mm (0.16”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e5 - Bottom O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1 FT Injector\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWARRANTY:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e90 days \u003c\/p\u003e\n\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441862357207,"sku":"5010113193","price":204.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441862389975,"sku":"5010113193-4","price":816.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441862422743,"sku":"5010113193-8","price":1632.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-80-lbhfueltech-7977760.jpg?v=1775099532"},{"product_id":"ft-injector-120-lb-h","title":"FT Injector 120 lb\/h","description":"\u003cdiv\u003e\n\u003cul class=\"tabs\"\u003e\u003c\/ul\u003e\n\u003cp\u003eThe FT Injector 120 lb\/hr (1,260 cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"FuelTech FT Injector Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-80-120-170-240.pdf\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_EV1.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cdiv class=\"feature_divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated.png?v=1723840241\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/17welLn0DEc?si=G9exUVLJigp2Sasi\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eTECHNICAL DESCRIPTION\u003c\/h2\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoil resistance: (\u003cspan data-mce-fragment=\"1\"\u003e8.2 - 8.1\u003c\/span\u003e) Ohms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e1 - Overall height - \u003cspan data-mce-fragment=\"1\"\u003e74 mm (2.91”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e2 - Overall width - \u003cspan data-mce-fragment=\"1\"\u003e18 mm (0.71”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e3 - Top O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e4 - Tip - \u003cspan data-mce-fragment=\"1\"\u003e4.1 mm (0.16”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5 - Bottom O-ring diameter - \u003cspan data-mce-fragment=\"1\"\u003e14.50 mm (0.56”)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePRODUCT CONTENT:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1 FT Injector\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1 Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWARRANTY:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e90 days \u003c\/p\u003e\n\u003c\/div\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441862455511,"sku":"5010113192","price":209.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441862488279,"sku":"5010113192-4","price":836.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441862521047,"sku":"5010113192-8","price":1672.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-120-lbhfueltech-7866574.jpg?v=1775099532"},{"product_id":"ft-injector-1020-lb-h-gen-2","title":"FT Injector 1020 lb\/h GEN 2","description":"\u003cp dir=\"ltr\"\u003eThe FT Injector 1020 lb\/hr (10,710 cc\/min @ 90 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003ca title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injector Driver Product Page\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold-drivers\/products\/peak-and-hold-8a-2a-driver\"\u003e8A\/2A Peak \u0026amp; Hold Driver \u003c\/a\u003eor \u003cspan\u003e\u003ca title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver Product Page\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\"\u003e\u003c\/a\u003e\u003c\/span\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ca title=\"FuelTech FT Injectors - Low Impedance Fuel Injector Product Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\"\u003e\u003cspan\u003eView the FT Injector - Low Impedance Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe FT Injector 1020 lb\/hr GEN 2 by FuelTech is the ultimate fuel injector for extreme racing applications, designed to meet the demands of high-horsepower engines. With an industry-leading flow rate of 1020 pounds per hour at 90 psi, this injector guarantees that your engine receives the fuel it needs to deliver peak performance, no matter the conditions.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"FuelTech FT Injector Manual\" href=\"https:\/\/files.fueltech.net\/manuals\/FTInjector-1020.pdf\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/MRB_FUELTECH_INJECTOR_LOW_IMPEDANCE.x_t?v=1753283937\"\u003e\u003cstrong\u003eDOWNLOAD CAD FILE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e- \u003cstrong\u003eHigh Flow Rate:\u003c\/strong\u003e The FT Injector 1020 lb\/hr GEN 2 is engineered for serious power, offering one of the highest flow rates available. Perfect for turbocharged, high-boost, and high-performance engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e- \u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Each injector is crafted for accuracy, ensuring precise fuel delivery to maintain optimal air-fuel ratios and maximize combustion efficiency under extreme conditions while resisting fuel restriction from fuel contaminants. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e- Versatile Compatibility:\u003c\/strong\u003e Compatible with all ECUs and various fuels including gasoline, ethanol, methanol\/alcohol, nitromethane, nitropropane, MTBE, and ETBE. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e- Reliable Connectors:\u003c\/strong\u003e Features standard EV1 connectors with silver-plated terminals for enhanced conductivity and secure locking, even under intense engine vibrations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e- Redesigned for Durability:\u003c\/strong\u003e Built with hardened steel and a single moving part, the plunger, to reduce failure points and ensure long-lasting performance, even in the most demanding environments.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy Choose the FT Injector 1020 lb\/hr GEN 2?\u003c\/strong\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFuelTech's FT Injector 1020 lb\/hr GEN 2 sets a new standard in fuel delivery, making it the go-to choice for professional racers and high-performance enthusiasts alike. Whether you're competing on the drag strip, in rally sports, or in endurance racing, this injector provides the reliability and power you need to stay ahead of the competition.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"FuelTech FT Injector Base Flow Chart - Racing Fuel Injectors\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FuelTech-FT-Injector-Base-Flow-Chart-Fuel-Injectors-Updated_2048x2048.png?v=1723840241\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL DESCRIPTION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLow impedance: 1.5 Ohms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVoltage limit: up to 24V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIngress Protection: IP67 \/ NEMA6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eInjector: 86.3 x 29 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePacking: 223 x 162 x 60 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eShipping packaging dimensions: 225 x 250 x 65 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003cspan\u003e 160g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePRODUCT PACKAGE CONTENTS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 FT Injector\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e1 Manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cb id=\"docs-internal-guid-9b8323ae-7fff-7b2a-ac2e-8e66efa895e7\"\u003e\u003cspan\u003eWARRANTY:\u003c\/span\u003e\u003cspan\u003e 90 days\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c!----\u003e\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441862979799,"sku":"5010114197","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441863012567,"sku":"5010114197-4","price":1996.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441863045335,"sku":"5010114197-8","price":3992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-1020-lbh-gen-2fueltech-8131082.jpg?v=1775099531"},{"product_id":"ev1-to-ev6-fuel-injector-adapter","title":"EV1 to EV6 Fuel Injector Adapter","description":"","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":48441864028375,"sku":"5010100774","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ev1-to-ev6-fuel-injector-adapterfueltech-8860910.jpg?v=1775099473"},{"product_id":"ev6-to-ev1-fuel-injector-adapter","title":"EV6 to EV1 Fuel Injector Adapter","description":"","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":48441864061143,"sku":"5010100775","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ev6-to-ev1-fuel-injector-adapterfueltech-6415218.jpg?v=1775099472"},{"product_id":"ft-injector-170-lb-h-ev6","title":"FT Injector 170 lb\/h - EV6 Connector","description":"\u003cp\u003eThe FT Injector 170 lb\/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requiring no Peak and Hold driver. Delivering a consistent 1785 cc\/min at 43.5 psi, it ensures accurate fuel delivery for high-horsepower applications, from street builds to full race setups.\u003c\/p\u003e\n\u003cp\u003eCompatible with all major fuels—gasoline, ethanol, methanol, nitromethane, nitropropane, MTBE, and ETBE—this injector offers exceptional adaptability for a wide range of performance needs. Its EV6 connectors feature silver-plated terminals for superior electrical conductivity, while corrosion-resistant internal components provide long-lasting performance, even in aggressive fuel environments.\u003c\/p\u003e\n\u003cp\u003eDesigned in a short length format, this model uses the EV6 connector commonly found in modern vehicles. Paired with a USCAR plug renowned for its extended reach and outstanding water resistance, it delivers unmatched durability and reliability, even under the harshest operating conditions.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FT-Injector-Manual.pdf?v=1755282129\" title=\"FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441865666775,"sku":"5010115897","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441865699543,"sku":"5010115897-4","price":876.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441865732311,"sku":"5010115897-8","price":1752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-170-lbh-ev6-connectorfueltech-9531979.png?v=1775099473"},{"product_id":"ft-injector-240-lb-h-ev6-connector","title":"FT Injector 240 lb\/h - EV6 Connector","description":"\u003cp\u003eThe FT Injector 240 lb\/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requiring no Peak and Hold driver. Delivering a consistent 2,520 cc\/min at 43.5 psi, it ensures accurate fuel delivery for high-horsepower applications, from street builds to full race setups.\u003c\/p\u003e\n\u003cp\u003eCompatible with all major fuels—gasoline, ethanol, methanol, nitromethane, nitropropane, MTBE, and ETBE—this injector offers exceptional adaptability for a wide range of performance needs. Its EV6 connectors feature silver-plated terminals for superior electrical conductivity, while corrosion-resistant internal components provide long-lasting performance, even in aggressive fuel environments.\u003c\/p\u003e\n\u003cp\u003eDesigned in a short length format, this model uses the EV6 connector commonly found in modern vehicles. Paired with a USCAR plug renowned for its extended reach and outstanding water resistance, it delivers unmatched durability and reliability, even under the harshest operating conditions.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"FT Injector Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FT-Injector-Manual.pdf?v=1755282129\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441865765079,"sku":"5010115898","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441865797847,"sku":"5010115898-4","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441865830615,"sku":"5010115898-8","price":1992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-240-lbh-ev6-connectorfueltech-2385866.jpg?v=1775099474"},{"product_id":"ft-injector-120-lb-h-ev6-connector","title":"FT Injector 120 lb\/h - EV6 Connector","description":"\u003cp\u003eThe FT Injector 120 lb\/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requiring no Peak and Hold driver. Delivering a consistent 1260 cc\/min at 43.5 psi, it ensures accurate fuel delivery for high-horsepower applications, from street builds to full race setups.\u003c\/p\u003e\n\u003cp\u003eCompatible with all major fuels—gasoline, ethanol, methanol, nitromethane, nitropropane, MTBE, and ETBE—this injector offers exceptional adaptability for a wide range of performance needs. Its EV6 connectors feature silver-plated terminals for superior electrical conductivity, while corrosion-resistant internal components provide long-lasting performance, even in aggressive fuel environments.\u003c\/p\u003e\n\u003cp\u003eDesigned in a short length format, this model uses the EV6 connector commonly found in modern vehicles. Paired with a USCAR plug renowned for its extended reach and outstanding water resistance, it delivers unmatched durability and reliability, even under the harshest operating conditions.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"FT Injector Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FT-Injector-Manual.pdf?v=1755282129\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441865961687,"sku":"5010115896","price":209.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441865994455,"sku":"5010115896-4","price":836.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441866027223,"sku":"5010115896-8","price":1672.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-120-lbh-ev6-connectorfueltech-6823316.jpg?v=1775099473"},{"product_id":"ft-injector-80-lb-h-ev6-connector","title":"FT Injector 80 lb\/h - EV6 Connector","description":"\u003cp\u003e\u003cspan\u003eThe FT Injector 80 lb\/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requiring no Peak and Hold driver. Delivering a consistent 840 cc\/min at 43.5 psi, it ensures accurate fuel delivery for high-horsepower applications, from street builds to full race setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with all major fuels—gasoline, ethanol, methanol, nitromethane, nitropropane, MTBE, and ETBE—this injector offers exceptional adaptability for a wide range of performance needs. Its EV6 connectors feature silver-plated terminals for superior electrical conductivity, while corrosion-resistant internal components provide long-lasting performance, even in aggressive fuel environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned in a short length format, this model uses the EV6 connector commonly found in modern vehicles. Paired with a USCAR plug renowned for its extended reach and outstanding water resistance, it delivers unmatched durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1414\/6340\/files\/FT-Injector-Manual.pdf?v=1755282129\" title=\"FT Injector Manual\"\u003eDOWNLOAD MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-teams=\"true\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":48441866158295,"sku":"5010115895","price":204.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":48441866191063,"sku":"5010115895-4","price":816.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":48441866223831,"sku":"5010115895-8","price":1632.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/ft-injector-80-lbh-ev6-connectorfueltech-9353336.png?v=1775099473"},{"product_id":"fuel-injector-micro-filter","title":"High Impedance Fuel Injector Micro Filter","description":"\u003cul\u003e\n\u003cli\u003e6mm x 3mm brass ring\u003c\/li\u003e\n\u003cli\u003e12mm long\u003c\/li\u003e\n\u003cli\u003eOnly compatible with FuelTech High Impedance line of injectors:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFT Injector 80 lb\/h\u003c\/li\u003e\n\u003cli\u003eFT Injector 120 lb\/h\u003c\/li\u003e\n\u003cli\u003eFT Injector 170 lb\/h\u003c\/li\u003e\n\u003cli\u003eFT Injector 240 lb\/h\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":48441866617047,"sku":"5018100848","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/high-impedance-fuel-injector-micro-filterfueltech-3992296.jpg?v=1775099468"},{"product_id":"injector-dynamics-id1050x-injectors-14mm-grey-adaptor-top-set-of-8","title":"Injector Dynamics ID1050X Injectors - 2007-2014 GT500 (Set of 8)","description":"Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470475309271,"sku":"IDX1050.48.14.14.8","price":1201.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-id1050x-injectors-2007-2014-gt500-set-of-8injector-dynamics-5579881.jpg?v=1776144971"},{"product_id":"injector-dynamics-1050cc-injectors-60mm-length-14mm-grey-adaptor-top-blue-bottom-adap-set-of-8","title":"Injector Dynamics - 1050cc Injectors Mustang GT 2011+ (includes GT350)","description":"Injector Dynamics - 1050cc Injectors 60mm Length 14mm Grey Adaptor Top - Blue Bottom Adap (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470476619991,"sku":"IDX1050.60.14.14B.8","price":1247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-1050cc-injectors-mustang-gt-2011-includes-gt350injector-dynamics-4801171.jpg?v=1776057068"},{"product_id":"injector-dynamics-1340cc-injectors-48mm-length-14mm-grey-top-14mm-lower-o-ring-set-of-8","title":"Injector Dynamics 1340cc Injectors -2007-2014 GT500 (Set of 8)","description":"Injector Dynamics 1340cc Injectors - 48mm Length - 14mm Grey Top - 14mm Lower O-Ring (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470477930711,"sku":"IDX1300.48.14.14.8","price":2079.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-1340cc-injectors-2007-2014-gt500-set-of-8injector-dynamics-1658613.jpg?v=1776144971"},{"product_id":"injector-dynamics-1340cc-injector-60mm-length-14mm-grey-top-blue-bottom-adaptor-set-of-8","title":"Injector Dynamics 1340cc Injectors - Mustang GT 2011+ (includes GT350)","description":"Injector Dynamics 1340cc Injector - 60mm Length - 14mm Grey Top - Blue Bottom Adaptor (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470478848215,"sku":"IDX1300.60.14.14B.8","price":2125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-1340cc-injectors-mustang-gt-2011-includes-gt350injector-dynamics-6850220.jpg?v=1776057067"},{"product_id":"injector-dynamics-1750-xds-48mm-length-14mm-top-14mm-lower-o-ring-set-of-8","title":"Injector Dynamics 1750-XDS - 2007-2014 GT500 (Set of 8)","description":"Injector Dynamics 1750-XDS - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470479470807,"sku":"IDX1750.48.14.14.8","price":2679.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-1750-xds-2007-2014-gt500-set-of-8injector-dynamics-2120137.jpg?v=1776144971"},{"product_id":"injector-dynamics-1750-xds-60mm-length-14mm-grey-top-silver-bottom-adapt-set-of-8","title":"Injector Dynamics 1750-XDS - Mustang GT 2011+ (includes GT350)","description":"Injector Dynamics 1750-XDS - 60mm Length - 14mm Grey Top - Silver Bottom Adapt (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470480224471,"sku":"IDX1750.60.14.14B.8","price":2725.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-1750-xds-mustang-gt-2011-includes-gt350injector-dynamics-6761355.jpg?v=1776144970"},{"product_id":"injector-dynamics-2600-xds-injectors-48mm-length-14mm-top-14mm-lower-o-ring-set-of-8","title":"Injector Dynamics 2600-XDS Injectors - 2007-2014 GT500 (Set of 8)","description":"Injector Dynamics 2600-XDS Injectors - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470480879831,"sku":"IDX2600.48.14.14.8","price":3187.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-2600-xds-injectors-2007-2014-gt500-set-of-8injector-dynamics-9840134.jpg?v=1776144970"},{"product_id":"injector-dynamics-2600-xds-injectors-60mm-length-14mm-top-14mm-bottom-adapter-set-of-8","title":"Injector Dynamics 2600-XDS Injectors - Mustang GT 2011+ (includes GT350)","description":"Injector Dynamics 2600-XDS Injectors - 60mm Length - 14mm Top - 14mm Bottom Adapter (Set of 8)","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":48470481469655,"sku":"IDX2600.60.14.14B.8","price":3234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/0227\/1926\/files\/injector-dynamics-2600-xds-injectors-mustang-gt-2011-includes-gt350injector-dynamics-7812604.jpg?v=1776057067"}],"url":"https:\/\/billetproshop.com\/en-ca\/collections\/injectors.oembed","provider":"Billet Pro Shop","version":"1.0","type":"link"}