Sensores/válvulas Fueltech

FuelTech's VR-Hall Converter Gen. 3 is the ultimate solution for converting analog Variable Reluctance, or VR, signals from sensors into precise Ha...

Úselo con el controlador de impulso integrado FT450 / FT500LITE / FT500 / FT550 / FT550LITE / FT600. Entrada de presión: 1/8" NPT Salida a W...

The Bosch LSU 4.2 Wideband O2 Sensor supports closed loop O2 maintaining optimal fuel delivery by delivering accurate measurements of the engine's ...

GM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs. Thread size: 3/8" NPT

FuelTech's Cylinder Head Temperature Thermocouple ID14MM offers faster and more accurate temperature readings for engine head temperature. Designed...

Measurements Total Travel: 2" Mounting: 4mm Heim joints Cable Length: 38.5"

TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-150 psi Thread size: 1/8" NPT   Connector Pinout: A - Ground B - 5V C - Signal

Standard Oxygen Sensor Plug M18 x 1.5 Thread Material: Stainless steel

Hall effect variant of the common 3/4-16" thread crank sensor for flying magnet crank triggers. DOES NOT work with toothed ferrous metal trigger wh...

Standard Oxygen Sensor Bung M18 x 1.5 Thread Material: Stainless steel

The EGT Compression Fitting - Weld Bung is designed for secure and precise installation of exhaust gas temperature (EGT) sensors in high-performanc...

Used to freeze the stock MAP / MAF signal when it reaches a certain value, preventing the sensor from sending a value that is out of range for the ...

Screw in bung 1/8 NPT thread for 1/4 inches thermocoupler installation.

Description Downloads FuelTech's Cylinder Head Temperature Thermocouple offers faster and more accurate temperature readings for engine head te...

FuelTech's Air / Liquid Thermocouple temperature sensor is a precision type K temperature sensor designed for accurate temperature monitoring in a ...

Description Downloads The FuelTech Flex Fuel Sensor monitors and adjusts ignition timing, fuel injection, and boost levels based on the ethanol ...

Description Downloads Obtain vital data in order to determine whether the turbo is operating within its compressor map and at its highest effici...

The FuelTech Temperature Sensor (0-300°F) is a high-quality stainless-steel sensor, designed for precision temperature measurements in demanding en...

If you are exceeding the limit for your ECU's internal MAP sensor or you want to add an external MAP sensor, the External MAP Sensor, 10 Bar provid...

Entrada de presión: 1/8" NPT Salida a Wastegate: 1/8" NPT

Monitor crankcase vacuum inside your engine to make sure piston rings are sealing properly in the cylinders. Output: 0.5-4.5V Supply: 5V Range: -1...

FuelTech's Air Temperature Sensor is a high-quality GM-style intake air temperature sensor, designed for accurate monitoring of air temperature in ...

The FuelTech PS-10B 10 Bar Pressure Sensor is designed to deliver accurate and reliable pressure measurements for high-performance applications. Id...

Descripción Manual Punta expuesta del termopar El nuevo termopar FuelTech con punta expuesta ofrece una lectura de temperatura m...