Products

Downloads  FT Dual Power Driver Manual The FT Dual Power Driver is a current amplifier that allows using the ECU outputs to activate electrica...

The FT Injector 1020 lb/hr (10,710 cc/min @ 90 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 120 lb/hr (1,260 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is req...

The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 240 lb/hr (2520cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 320 lb/hr (2,226 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 520 lb/hr (3,822 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Dri...

The FT Injector 720 lb/hr (5,449 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 80 lb/hr (840 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 820 lb/hr (5,880 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 85 lb/hr GEN 3 is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector ...

Dimensions Upper - (7.52 x 3.53) Lower - (7.59 x 2.62)   Each Low Impedance FT Injector (320 lb/h, 520 lb/h, 720 lb/hr & 820lb/h) fits one ...

Description Downloads Input Expander Module for PowerFT line  FT Input Expander Manual Input Expander Module for PowerFT line (FT500 / FT500LI...

Description Downloads The FuelTech Input Expander module adds 24 additional inputs (20 analog and 4 VR) when used with any PowerFT line ECU (FT4...

The FT Input Expander Connector Kit is designed to provide seamless connectivity for expanding your input capabilities. This kit includes a 34-pin ...

FT Input Expander Harness, Length 10ft.

Used to extend main harness on dynamometers. Has male and female plugs.No of ways: 24 Length: 13ft

FT200, FT250, FT300, FT350 and FT400 main harness Used on rear engine vehicles No of ways: 24

Description Downloads FT350 to FT450 adapter harness Access the FT350 to FT450 Adapter Harness Product Manual The FuelTech FT350 to FT450 Ad...

Description Downloads The FuelTech FT350 to FT450 Adapter Harness w/ Nano is designed for racers and tuners looking to upgrade from the FT350 w...