Skip to content

The Ti Shop

Titanium bolts are strong, lightweight, and corrosion resistant, but they must be installed with care to avoid damage. Follow these guidelines for safe and proper use:

• Always apply a quality anti seize compound or ARP Ultra Torque lubricant to the threads before installation. Titanium threads can seize easily when dry due to friction.

• Use a calibrated torque wrench and follow the recommended torque values. Do not exceed the specs. Titanium does not stretch like steel and can break if over tightened.

• When installing multiple bolts, such as on a beadlock ring, use a crisscross pattern and tighten in small increments to evenly distribute the load.

• Make sure threads are clean and properly engaged. For best results, thread engagement should be at least one and a half times the diameter of the bolt.

• Do not use impact tools or power drivers. Use hand tools only to maintain control and avoid thread damage.

• For beadlock applications, confirm that your tire bead crush is within spec. A typical safe range is between 0.100 inch and 0.125 inch. Excessive crush can place too much stress on the bolts.

Filters

$
$
12 Point Titanium Beadlock Bolt Kit - Billet Pro Shop

12 Point Titanium Beadlock Bolt Kit

The Ti Shop
$48.99 - $299.99
$48.99
$57.59 - $351.78
$57.59 - $351.78
$57.59

This kit replaces the beadlock bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.  5/16 - 18 x 1.125'' Flange diameter: 0.46''  Weight: 0.2...

View full details
$48.99 - $299.99
$48.99
$57.59 - $351.78
$57.59 - $351.78
$57.59
Ti Wheel Stud 1/2'' - 20 x 2.500'' (Fully Threaded) (Qty. 10) - Billet Pro Shop

Ti Wheel Stud 1/2'' - 20 x 2.500'' (Fully Threaded) (Qty. 10)

The Ti Shop
$112.19 - $112.19
$112.19
$112.19
$112.19 - $112.19
$112.19

CNC machined Grade 5 6Al-4V Titanium, sold in packs of 10.

$112.19 - $112.19
$112.19
$112.19
$112.19 - $112.19
$112.19
2011-2019 Coyote/Voodoo Front Cover Kit - Billet Pro Shop

2011+ Coyote Front Cover Titanium Bolt Kit

The Ti Shop
$100.09 - $100.09
$100.09
$100.09
$100.09 - $100.09
$100.09

This kit replaces the the M8 front cover bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.   15 Pieces Weight Savings: 0.4336 lbs / 196....

View full details
$100.09 - $100.09
$100.09
$100.09
$100.09 - $100.09
$100.09

Titanium Wheel Stud Kit (Qty. 10)

The Ti Shop
$340.00 - $340.00
$340.00
$340.00 - $340.00
$340.00

CNC machined Grade 5 6Al-4V Titanium. Inclusions & Features: 10 x 5/8"-18 DLC coated Titanium Wheel Studs 10 x 5/8"-18 Titanium Nylocks 10 x 5...

View full details
$340.00 - $340.00
$340.00
$340.00 - $340.00
$340.00
2007-2014 Shelby GT500 Lower Intake Bolt Kit - Billet Pro Shop

2007-2014 Shelby GT500 Lower Intake Bolt Kit

The Ti Shop
$80.49 - $80.49
$80.49
$80.49
$80.49 - $80.49
$80.49

This kit replaces the lower intake to head bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.  14 pieces

$80.49 - $80.49
$80.49
$80.49
$80.49 - $80.49
$80.49
TI Flanged 12 Point 1/2" - 20 Nut & 1/2" Shank Lug Nut Combo (QTY. 10) - Billet Pro Shop

TI Flanged 12 Point 1/2" - 20 Nut & 1/2" Shank Lug Nut Combo (QTY. 10)

The Ti Shop
$159.99 - $159.99
$159.99
$159.99
$159.99 - $159.99
$159.99

CNC machined forged Grade 5 6Al-4V Titanium 12 point nuts and CNC machined 7075 aluminum shank washers. 10 x 1/2" -20 12 point nuts 10 x 1/2" shan...

View full details
$159.99 - $159.99
$159.99
$159.99
$159.99 - $159.99
$159.99
2007-2014 Shelby GT500 Supercharger to Lower Intake Bolt Kit

2007-2014 Shelby GT500 Supercharger to Lower Intake Bolt Kit

The Ti Shop
$71.39 - $71.39
$71.39
$71.39
$71.39 - $71.39
$71.39

This kit replaces the supercharger to lower intake manifold bolts CNC machined Grade 5 6Al-4V Titanium hardware.  This is intended for factory blow...

View full details
$71.39 - $71.39
$71.39
$71.39
$71.39 - $71.39
$71.39
Ford 8.8 Ring Gear Bolt Kit - Billet Pro Shop

Titanium 8.8 Ring Gear Bolt Kit

The Ti Shop
$61.19 - $61.19
$61.19
$61.19
$61.19 - $61.19
$61.19

This kit replaces the ring gear bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.  10 pieces

$61.19 - $61.19
$61.19
$61.19
$61.19 - $61.19
$61.19
Titanium 1/2" - 20 Acorn Lug Nuts (QTY. 10) - Billet Pro Shop

Titanium 1/2" - 20 Acorn Lug Nuts (QTY. 10)

The Ti Shop
$121.49 - $121.49
$121.49
$121.49
$121.49 - $121.49
$121.49

CNC machined forged Grade 5 6Al-4V Titanium 12 point lug nut.  Requires 3/4" 12 point socket Sold in packs of ten (10).  

$121.49 - $121.49
$121.49
$121.49
$121.49 - $121.49
$121.49
Ti Flanged 12 Point Nut M14 - 1.5 - Billet Pro Shop

Ti Flanged 12 Point Nut M14 - 1.5

The Ti Shop
$9.89 - $9.89
$9.89
$9.89
$9.89 - $9.89
$9.89

CNC machined forged Grade 5 6Al-4V Titanium  Weight: 10.75 g each  

$9.89 - $9.89
$9.89
$9.89
$9.89 - $9.89
$9.89

Titanium Beadlock Bolt Washer (5/16 ID / 9/16 OD)

The Ti Shop
$1.00 - $1.00
$1.00
$1.00 - $1.00
$1.00

Sold individually

$1.00 - $1.00
$1.00
$1.00 - $1.00
$1.00

Ti Wheel Stud 5/8'' - 18 x 2.500''

The Ti Shop
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

CNC machined Grade 5 6Al-4V Titanium, sold individually. 2.500" working length, 3.375" overall length. Black DLC Coated

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
Ti Flanged Hex Bolt M8 - 1.25 x 50mm - Billet Pro Shop

Ti Flanged Hex Bolt M8 - 1.25 x 50mm

The Ti Shop
$8.39 - $8.39
$8.39
$8.39
$8.39 - $8.39
$8.39

CNC machined Grade 5 6Al-4V Titanium Weight: 15.80 g each

$8.39 - $8.39
$8.39
$8.39
$8.39 - $8.39
$8.39
2007-2014 Shelby GT500 Front Cover Kit - Billet Pro Shop

2007-2014 Shelby GT500 Front Cover Kit

The Ti Shop
$89.19 - $89.19
$89.19
$89.19
$89.19 - $89.19
$89.19

This kit replaces the the M8 front cover bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.  14 pieces

$89.19 - $89.19
$89.19
$89.19
$89.19 - $89.19
$89.19
TI M14 x 1.5 Acorn 60* Seat Lug Nuts (QTY. 10) - Billet Pro Shop

TI M14 x 1.5 Acorn 60* Seat Lug Nuts (QTY. 10)

The Ti Shop
$121.49 - $121.49
$121.49
$121.49
$121.49 - $121.49
$121.49

CNC machined forged Grade 5 6Al-4V Titanium 12 point lug nut.  Requires 3/4" 12 point socket Sold in packs of ten (10).  

$121.49 - $121.49
$121.49
$121.49
$121.49 - $121.49
$121.49
TI 1/2" - 20 Acorn 60* Seat Lug Nut - Billet Pro Shop

Titanium 1/2" - 20 Acorn Lug Nut

The Ti Shop
$14.29 - $14.29
$14.29
$14.29
$14.29 - $14.29
$14.29

CNC machined forged Grade 5 6Al-4V Titanium 12 point lug nut.  Requires 3/4" 12 point socket  

$14.29 - $14.29
$14.29
$14.29
$14.29 - $14.29
$14.29
Ti Flanged Hex Nut 5/8 - 18 - Billet Pro Shop

Ti Flanged Hex Nut 5/8 - 18

The Ti Shop
$12.00 - $12.00
$12.00
$12.00
$12.00 - $12.00
$12.00

 CNC machined Grade 5 6Al-4V Titanium  Weight: 23.50 g each

$12.00 - $12.00
$12.00
$12.00
$12.00 - $12.00
$12.00
Ti Flanged Hex Bolt M12 - 1.75 x 140mm - Billet Pro Shop

Ti Flanged Hex Bolt M12 - 1.75 x 140mm

The Ti Shop
$27.79 - $27.79
$27.79
$27.79
$27.79 - $27.79
$27.79

CNC machined Grade 5 6Al-4V Titanium Weight: 81.95 g each 

$27.79 - $27.79
$27.79
$27.79
$27.79 - $27.79
$27.79
2005-2014 Ford Mustang K-Member/Rad Support Bolt Kit - Billet Pro Shop

2005-2014 Ford Mustang K-Member/Rad Support Bolt Kit

The Ti Shop
$257.29 - $257.29
$257.29
$257.29
$257.29 - $257.29
$257.29

This kit replaces the K-member/Rad support to frame bolts with CNC machined Grade 5 6Al-4V Titanium hardware. 20 pieces

$257.29 - $257.29
$257.29
$257.29
$257.29 - $257.29
$257.29
TI M14 x 1.5 Acorn 60* Seat Lug Nut - Billet Pro Shop

TI M14 x 1.5 Acorn 60* Seat Lug Nut

The Ti Shop
$14.29 - $14.29
$14.29
$14.29
$14.29 - $14.29
$14.29

CNC machined forged Grade 5 6Al-4V Titanium 12 point lug nut.  Requires 3/4" 12 point socket  

$14.29 - $14.29
$14.29
$14.29
$14.29 - $14.29
$14.29
Beadlock Bolt Kit 5/16 - 18 x 1'' (11/16" flange) - Billet Pro Shop

Beadlock Bolt Kit 5/16 - 18 x 1'' (11/16" flange)

The Ti Shop
$60.58 - $273.78
$60.58
$60.58 - $273.78
$60.58 - $273.78
$60.58

This kit replaces the beadlock bolts with  CNC machined Grade 5 6Al-4V Titanium hardware.  Flange diameter: 0.68''   

$60.58 - $273.78
$60.58
$60.58 - $273.78
$60.58 - $273.78
$60.58
Ti Valve Spring Retainer (11-17 Coyote) - Billet Pro Shop

Ti Valve Spring Retainer (11-23 Coyote/Voodoo/Predator)

The Ti Shop
$12.49 - $12.49
$12.49
$12.49
$12.49 - $12.49
$12.49

CNC machined Grade 5 6Al-4V Titanium, sold individually.

$12.49 - $12.49
$12.49
$12.49
$12.49 - $12.49
$12.49

Aluminum 11/16" ID X .300" Wide Spacer

The Ti Shop
$4.99 - $4.99
$4.99
$4.99
$4.99 - $4.99
$4.99

CNC machined 6061-T6 Aluminum. For use with 5/8" - 18  Wheel Studs.

$4.99 - $4.99
$4.99
$4.99
$4.99 - $4.99
$4.99
Ti Flanged 12 Point Nut 1/2 - 20 - Billet Pro Shop

Ti Flanged 12 Point Nut 1/2 - 20

The Ti Shop
$8.99 - $8.99
$8.99
$8.99
$8.99 - $8.99
$8.99

CNC machined forged Grade 5 6Al-4V Titanium  Weight: 8.00 g each  

$8.99 - $8.99
$8.99
$8.99
$8.99 - $8.99
$8.99

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare