Turbo Intake Air Temp Sensor Kit, M16 x 1.5 with Weld Bung PN: 153302

Lowdoller Motorsports high temperature intake air temperature sensor kit for turbo and supercharged combos. Everything to weld a bung into the charge pipe or intake and wire the sensor: an all brass M16 x 1.5 sensor that handles the heat a plastic sensor will not, the billet weld bung, the connector and the pins and seals.

What's included

• All brass high temperature intake air temp sensor, M16 x 1.5 thread
• M16 x 1.5 billet aluminum weld bung
• Electrical connector
• 2 crimp pins
• 2 silicone grommet seals

Compatible with Holley, FuelTech, Haltech and other EFI systems. Resistance runs from 9,160 ohms at 14°F to 36 ohms at 284°F; the Holley scaling chart is in the photos and the FuelTech voltage scaling is available from Lowdoller.

Lowdoller part number 153302.