FuelTech

FuelTech's FTSPARK Ignition Module is an exceptionally high-energy Capacitive Discharge Ignition (CDI) system engineered to meet the most demanding...

The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 820 lb/hr (5,880 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 520 lb/hr (3,822 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Dri...

WB-O2 Datalogger harness.Feed inputs, analog channel inputs and analog outputNo of ways: 10 Length: 2.5m (8.2ft)

SparkPRO-1 harness.No of ways: 4 Length: 2m (6.5ft)

SparkPRO-2 harness.No of ways: 6 Length: 2m (6.5ft)

SparkPRO-4 harness.No of ways: 10 Length: 2m (6.5ft)

SparkPRO-3 harness.No of ways: 8 Length: 2m (6.5ft)

SparkPRO-8 harness.No of ways: 18 Length: 2m (6.5ft)

SparkPRO-5 harness.No of ways: 12 Length: 2m (6.5ft)

SparkPRO-6 harness.No of ways: 14 Length: 2m (6.5ft)

The Peak & Hold PRO Harness is designed to connect FuelTech's Peak & Hold PRO injector driver to your engine management system. It ensures ...

Peak & Hold harness.Compatible with all current versionsNo of ways: 10 Length: 2m (6.5 ft) 

WB-O2 Datalogger adapter Harness to FT400/FT350/FT250/FT300/

This adapter is required when using our Alcohol O2 module with our PRO500 or PRO600 harness. It will adapt the dual Nano connectors to a single d...

This adapter is used when running a LSU4.2 wiring harness with a NanoPRO to use a NTK lab grade sensor. This adapter is used when running our Al...

Peak and Hold Jumpers are required when using any complete FT harness with high impedance injectors. (1 per 4 injectors).

Upgrade your fuel injection system effortlessly with the FuelTech Peak & Hold Pro Y Adapter Harness. This versatile harness enables a seamless ...

Description Downloads A FuelTech FT450 engine management system easily replaces the factory Honda Grom ECU thanks to an easy to install FuelTec...

Description Downloads The FuelTech PROBIKE A Harness is a terminated harness to be used with a FT450 or FT550 ECU. Designed for 4-cylinder spor...

Description Downloads FuelTech PROBIKE B Expansion Harness is a terminated expansion harness to be used with an FT550 ECU and a PROBIKE A Harnes...

Description Downloads  The FuelTech FT550 LS Engine GEN IV Complete Harness offers plug and play installation for a standalone LS swap utilizing...