Skip to content
Order $300 of BPS Products to receive a FREE Gift Card!
Order $300 of BPS Products to receive a FREE Gift Card!

Billet Pro Shop

Filters

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Bypass/delete.

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Bypass/delete

Billet Pro Shop
$194.00 - $194.00
$194.00
$194.00 - $194.00
$194.00

Oil cooler bypass for the new Ford 7.3L Godzilla. Features: CNC machined 6061-T6 aluminum Hard black anodized Includes stainless st...

View full details
$194.00 - $194.00
$194.00
$194.00 - $194.00
$194.00
BPS EGT Bulkhead (Sold in pairs)

BPS EGT Bulkhead (4 Probes)

Billet Pro Shop
$135.00 - $270.00
$135.00 - $270.00
$135.00 - $270.00
$135.00

The BPS EGT Bulkhead facilitates the passage of wires through the firewall and works with Holley/Low Dollar EGT connectors, featuring a locking mec...

View full details
$135.00 - $270.00
$135.00 - $270.00
$135.00 - $270.00
$135.00
BPS 2020+ Ford 7.3L Godzilla Oil Cooler Coolant Block-Off - Billet Pro Shop

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Coolant Block-Off

Billet Pro Shop
$89.00 - $89.00
$89.00
$89.00 - $89.00
$89.00

This fitting will fill the coolant passage void left on the side of the block when deleting the oil cooler. (Located on driver side above oil coole...

View full details
$89.00 - $89.00
$89.00
$89.00 - $89.00
$89.00
Coyote Secondary Chain Guides - Billet Pro Shop

BPS 2011+ Coyote Secondary Chain Guides

Billet Pro Shop
$134.00 - $134.00
$134.00
$134.00 - $134.00
$134.00

Billet Pro Shop secondary guides are the solution for engines that run locked out cams; especially those with increased valve spring pressure and ...

View full details
$134.00 - $134.00
$134.00
$134.00 - $134.00
$134.00
BPS 2020+ Ford 7.3L Godzilla Engine Lift Plate.

BPS 2020+ Ford 7.3L Godzilla Engine Lift Plate

Billet Pro Shop
$99.00 - $149.00
$99.00 - $149.00
$99.00 - $149.00
$99.00

Make your swap an easy one with our engine lift plates. These bolt up to the heads using all the intake manifold bolt locations.  Features: Hardw...

View full details
$99.00 - $149.00
$99.00 - $149.00
$99.00 - $149.00
$99.00
BPS Front Cylinder Head Coolant Adapters (2011-2020 Mustang).

BPS Front Cylinder Head Coolant Adapters (2011-2020 Mustang)

Billet Pro Shop
$89.00 - $177.00
$89.00 - $177.00
$89.00 - $177.00
$89.00

Replace the factory coolant system with AN fittings and hoses using our billet adapters. These provide you the possibility of running a dry decked ...

View full details
$89.00 - $177.00
$89.00 - $177.00
$89.00 - $177.00
$89.00
BPS Exhaust Trim Ring - Billet Pro Shop

BPS Exhaust Trim Ring

Billet Pro Shop
$23.00 - $23.00
$23.00
$23.00 - $23.00
$23.00

 CNC laser cut 16 gauge aluminum, perfect thickness to fit body curves. Sold individually. Includes 8 aluminum rivets. Please select your exhaust t...

View full details
$23.00 - $23.00
$23.00
$23.00 - $23.00
$23.00
BPS Crossover Plug (2003-2004 Cobra).

BPS Crossover Plug (2003-2004 Cobra)

Billet Pro Shop
$59.00 - $74.00
$59.00 - $74.00
$59.00 - $74.00
$59.00

OE replacement coolant crossover tube plug. Features: Billet Stainless Steel O-rings to ensure a proper seal Offered in a natural machined finish ...

View full details
$59.00 - $74.00
$59.00 - $74.00
$59.00 - $74.00
$59.00
BPS Valve Cover Inserts (2007-2014-GT500 & 2003-2004 Cobra).

BPS Valve Cover Inserts (2007-2014-GT500 & 2003-2004 Cobra)

Billet Pro Shop
$188.00 - $188.00
$188.00
$188.00 - $188.00
$188.00

Our billet aluminum inserts for the 1993-2014 4.6 / 5.4 application are a great add-on to dress up your engine. These inserts are offered in black ...

View full details
$188.00 - $188.00
$188.00
$188.00 - $188.00
$188.00
BPS Billet Shank/Flat Aluminum Lug Nuts - Billet Pro Shop

BPS Billet Shank/Flat Aluminum Lug Nuts

Billet Pro Shop
$150.00 - $180.00
$150.00 - $180.00
$150.00 - $180.00
$150.00

 Our aluminum shank lugs are designed to fit wheels requiring a 1/2” shank. These will enable you to keep the factory sized studs and install your ...

View full details
$150.00 - $180.00
$150.00 - $180.00
$150.00 - $180.00
$150.00
BPS Acorn/Cone Seat Aluminum Lug Nuts - Billet Pro Shop

BPS Acorn/Cone Seat Aluminum Lug Nuts

Billet Pro Shop
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

 Our aluminum acorn lugs are designed to fit wheels requiring an OEM style acorn seat. Features: CNC machined billet aluminum that has been surfac...

View full details
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00
BPS "Terminator" Coil Covers (2003 - 2004 Cobra) - Billet Pro Shop

BPS "Terminator" Coil Covers (2003-2004 Cobra)

Billet Pro Shop
$359.00 - $359.00
$359.00
$359.00 - $359.00
$359.00

Factory replacement billet coil covers for 2003-2004 "Terminator" SVT Cobras. Features: CNC machined 6061-T6 aluminum Direct replacement for OE co...

View full details
$359.00 - $359.00
$359.00
$359.00 - $359.00
$359.00
BPS Billet Coil Cover Inserts (2003-2004 Cobra).

BPS Billet Coil Cover Inserts (2003-2004 Cobra)

Billet Pro Shop
$44.00 - $44.00
$44.00
$44.00 - $44.00
$44.00

Replace the factory bolts that hold down the coil covers with these high quality CNC machined, billet inserts and stainless steel hardware. Like al...

View full details
$44.00 - $44.00
$44.00
$44.00 - $44.00
$44.00
BPS 2011+ Coyote Timing Chain Arms/Guides - Billet Pro Shop

BPS 2011+ Coyote Timing Chain Arms/Guides

Billet Pro Shop
$323.00 - $704.00
$323.00 - $704.00
$323.00 - $704.00
$323.00

BPS timing chain arms are a direct factory replacement. Available in CNC machined 6061-T6 aluminum or our proprietary methanol resistant plastic po...

View full details
$323.00 - $704.00
$323.00 - $704.00
$323.00 - $704.00
$323.00
BPS Low-Pro Series Adapter Fitting ORB to AN - Billet Pro Shop

BPS Low-Pro Series Adapter Fitting ORB to AN

Billet Pro Shop
$26.00 - $36.00
$26.00 - $36.00
$26.00 - $36.00
$26.00

BPS Low-Pro Series Adapter Fittings were designed especially for those tight spaces. Our fittings have an overall reduced height compared to other ...

View full details
$26.00 - $36.00
$26.00 - $36.00
$26.00 - $36.00
$26.00
BPS Valve Cover Fittings - Billet Pro Shop

BPS Valve Cover Fittings

Billet Pro Shop
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

BPS -10 & -12 Valve Cover Fittings are a direct fit into to either valve cover enabling you to install your Breather/Catch Can/PCV using high q...

View full details
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00
BPS 2011-2022 Coyote Billet Rear Main Seal Cover - Billet Pro Shop

BPS 2011-2022 Coyote Billet Rear Main Seal Cover

Billet Pro Shop
$263.00 - $263.00
$263.00
$263.00 - $263.00
$263.00

Our CNC machined billet rear main seal covers are crafted from 6061-T6 aluminum and are designed to provide increased block rigidity, especially fo...

View full details
$263.00 - $263.00
$263.00
$263.00 - $263.00
$263.00
BPS Coyote VCT Block-Offs.

BPS Coyote VCT Block-Offs

Billet Pro Shop
$119.00 - $119.00
$119.00
$119.00 - $119.00
$119.00

These billet pieces will fill the void left when VCT is deleted. Simply installed by pressing them into the factory seals. Sold in a quantity of fo...

View full details
$119.00 - $119.00
$119.00
$119.00 - $119.00
$119.00
BPS 2011-2017 Coyote Secondary Tensioner Flip Bracket - Billet Pro Shop

BPS 2011-2017 Coyote Secondary Tensioner Flip Bracket

Billet Pro Shop
$98.00 - $98.00
$98.00
$98.00 - $98.00
$98.00

Like all modular engines, tension on the driver side head is applied in the wrong direction causing inconsistencies in the position of the cams. Th...

View full details
$98.00 - $98.00
$98.00
$98.00 - $98.00
$98.00
BPS Coyote VCT Lock Outs (2011+ Mustang).

BPS Coyote VCT Lock Outs (2011+ Mustang)

Billet Pro Shop
$344.00 - $644.00
$344.00 - $644.00
$344.00 - $644.00
$344.00

CNC machined 6061-T6 aluminum lockouts for 2011-2023 Coyote. Does not include hardware. Features: CNC machined 6061-T6 Black Anodized finish Cam p...

View full details
$344.00 - $644.00
$344.00 - $644.00
$344.00 - $644.00
$344.00
BPS Lightweight Brake Package (2005-2014 Mustang)

BPS Lightweight Brake Package (2005-2014 Mustang)

Billet Pro Shop
$344.00 - $411.00
$344.00 - $411.00
$344.00 - $411.00
$344.00

 This kit includes a pair of 10.5” drilled and slotted rotors, a pair of lightweight relocation brackets for the OEM calipers and ABS mounting brac...

View full details
$344.00 - $411.00
$344.00 - $411.00
$344.00 - $411.00
$344.00
BPS Lightweight Radiator Supports (2005-2014 Mustang).

BPS Lightweight Radiator Supports (2005-2014 Mustang)

Billet Pro Shop
$195.00 - $195.00
$195.00
$195.00 - $195.00
$195.00

This Radiator Support is a direct replacement for all 05-14 mustangs who do not use the front sway bar. Weighing in at 1 pound 5 ounces for the pai...

View full details
$195.00 - $195.00
$195.00
$195.00 - $195.00
$195.00
BPS Heater Core Return Fitting (2011 - 2020 Mustang) - Billet Pro Shop

BPS Heater Core Return Fitting (2011-2020 Mustang)

Billet Pro Shop
$81.00 - $81.00
$81.00
$81.00 - $81.00
$81.00

Replace the factory coolant system with AN fittings and hoses using our billet fittings.  Features: Stainless steel hardware included Hard black a...

View full details
$81.00 - $81.00
$81.00
$81.00 - $81.00
$81.00
BPS Modular/Coyote Engine Mid Plate.

BPS Modular/Coyote Engine Mid Plate

Billet Pro Shop
$180.00 - $180.00
$180.00
$180.00 - $180.00
$180.00

CNC cut 316 Stainless Steel Mid Plate. 0.080" thickness to ensure no alignment issues with starter. Must be used with front engine plates. 

$180.00 - $180.00
$180.00
$180.00 - $180.00
$180.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare