Injectors

Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation. Kit Includes: EV...

The FT Injector 240 lb/hr (2520cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 720 lb/hr (5,449 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

Description Downloads FuelTech’s Peak & Hold PRO Injector Driver is designed to control low impedance fuel injectors at a professional level...

Description Downloads FuelTech’s Peak & Hold 8A/2A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors ...

Description Downloads FuelTech’s Peak & Hold 4A/1A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors ...

Description Downloads FuelTech’s Peak & Hold 2A/0.5A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injector...

Use this kit when building a custom harness while using injectors with Nippon Denso connectors. Kit Includes: Nippon Denso injector connector, (2) ...

6mm x 3mm brass ring 12mm long Only compatible with FuelTech High Impedance line of injectors: FT Injector 80 lb/h FT Injector 120 lb/h FT Inject...

The FT Injector 80 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requ...

The FT Injector 120 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 240 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 170 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 1020 lb/hr (10,710 cc/min @ 90 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 120 lb/hr (1,260 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is req...

The FT Injector 80 lb/hr (840 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 320 lb/hr (2,226 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

Dimensions Upper - (7.52 x 3.53) Lower - (7.59 x 2.62)   Each Low Impedance FT Injector (320 lb/h, 520 lb/h, 720 lb/hr & 820lb/h) fits one ...

The FuelTech PRO600 Secondary Injector harness is designed as a true plug and play expansion to complement the PRO600 V8 harness. With this expansi...

Use this kit when building a custom harness while using injectors with EV6/EV14 connectors. Kit Includes: EV6/EV14 injector connector, (2) terminal...

Add these injector boots to your custom harness to protect the wiring and for a clean installation. *Injector connector not included.

The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...