1-855-260-7007
Sensors
Pressure, MAP, temperature, EGT, shock travel, speed and accelerometer sensors for Holley, FuelTech, Haltech and other EFI and data logging systems. Browse by sensor type below.
Filters
0-100 PSI Pressure Sensor (899 Series, Oil Filled) PN: 8990100
Low Doller5.0 / 5.0
3 Reviews
Lowdoller Motorsports 899-series 0-100 PSI pressure sensor, the oil filled silicon version. This is the one Lowdoller specifies for dome pressure a...
View full details0-150 PSI Pressure Sensor (899 Series, Oil Filled) PN: 8990150
Low DollerLowdoller Motorsports 899-series 0-150 PSI pressure sensor, oil filled silicon for the highest resolution and cleanest data. The 150 PSI range give...
View full details5 Bar MAP Sensor (-1 to +4 Bar) PN: 899005
Low DollerLowdoller Motorsports 5 bar MAP sensor for boosted combos up to 58 PSI. Pick the smallest bar rating that covers your boost for the best resolution...
View full details1/4" EGT Probe Kit, 8 Cylinder, K-Type PN: 153303
Low DollerLowdoller Motorsports complete 8 cylinder EGT kit with 1/4" OD Inconel K-type probes. Everything to put exhaust gas temperature on all 8 cylinders:...
View full detailsBanner QX4 Laser Ride Height Sensor
BannerBanner QX4 Laser Ride Height Sensor Includes harness
Oil Pressure & Temperature Combo Sensor 100 PSI / 500°F PN: 899403
Low DollerLowdoller Motorsports pressure and temperature combo sensor: 0-100 PSI and 0-500°F from one 1/8" NPT port. Same body size as the standard 100 PSI s...
View full detailsGM Intake Air Temp Sensor, 3/8" NPT, Holley MAT Plug and Play PN: 25036751
Low DollerLowdoller Motorsports GM style open element intake air temperature sensor, the one Holley EFI expects on the MAT input. It is a direct replacement ...
View full details0-100 PSI Pressure Sensor (799 Series, Ceramic) PN: 7990100
Low DollerLowdoller Motorsports 799-series 0-100 PSI pressure sensor. Dry ceramic transducer with a 0.5V to 4.5V output on a 5V supply, the same scaling Holl...
View full detailsLS Fuel Rail Pressure Sensor 0-100 PSI, 7/16"-20 Female with Schrader PN: 7990100-716
Low DollerLowdoller Motorsports 0-100 PSI fuel pressure sensor that screws straight onto the Schrader port of a stock LS 4.8, 5.3 and 6.0 fuel rail. The 7/16...
View full detailsConverter Pressure & Temperature Combo Sensor 300 PSI / 500°F PN: 899402
Low DollerLowdoller Motorsports pressure and temperature combo sensor sized for the transmission: 0-300 PSI and 0-500°F from one 1/8" NPT port. Log converter...
View full details1 Bar MAP / Pan Vacuum Sensor (-1 to 0 Bar) PN: 899001
Low DollerLowdoller Motorsports 1 bar vacuum sensor, built to log crankcase pressure on an engine running a pan vac pump so you can see how much vacuum the p...
View full detailsTurbo Intake Air Temp Sensor Kit, M16 x 1.5 with Weld Bung PN: 153302
Low DollerLowdoller Motorsports high temperature intake air temperature sensor kit for turbo and supercharged combos. Everything to weld a bung into the char...
View full details0-50 PSI Pressure Sensor (899 Series, Oil Filled) PN: 8990050
Low DollerLowdoller Motorsports 899-series 0-50 PSI pressure sensor, oil filled silicon. A low range sensor sized for carb fuel pressure and coolant pressure...
View full detailsCoolant Pressure & Temperature Combo Sensor 100 PSI / 500°F, M12 x 1.5 PN: 899401
Low DollerLowdoller Motorsports pressure and temperature combo sensor: 0-100 PSI and 0-500°F from one port. Metric M12 x 1.5 thread with a sealing ring, the ...
View full detailsLink ECU Knock Sensor with Loom
Link ECUWiring harness or cable for connecting your ECU, power module or display.
Link ECU Knock Sensor (Donut Type)
Link ECUSensor for use with standalone engine management.
Link ECU MAP Sensor 1.15 bar, Plug and pins
Link ECUPressure sensor for use with standalone engine management.
Link ECU Bosch LSU4.9 (5 Wire)
Link ECUWideband oxygen sensor component for closed loop fuel control and logging.
Link ECU Crank Angle Sensor (with plug/pins)
Link ECUSensor for use with standalone engine management.
Link ECU AIM GPS09 module
Link ECUSensor for use with standalone engine management.
Link ECU Hall Effect Sensor Kit
Link ECUSensor for use with standalone engine management.Hall Effect Sensor Kit.
Link ECU G4 KnockLink Kit - Includes Knock Sensor+Loom
Link ECUSensor for use with standalone engine management.KnockLink Kit with Loom/Sensor.
Link ECU 140 Bar Brake Pressure Sensor - M10x1.0
Link ECUPressure sensor for use with standalone engine management.High Pressure Sensor for Liquid, 140 bar (2030PSI).
Link ECU Exhaust Gas Temperature Probe
Link ECUTemperature sensor for use with standalone engine management.