TRZ Motorsports No Prep Adjustable Lower Control Arm Mounts

Longer adjustable lower control arm mounts from TRZ Motorsports with dual hole sets and 13 points of adjustment. Made for 3rd and 4th gen Camaros and S197 Mustangs with stock location torque boxes, and for any car with a very low ride height. Sold as a pair, unwelded or pre-welded.

Features

• Dual hole sets with 13 points of adjustment
• Made for 3" axle tubes, and can be modified for 3.25" or 3.5" tubes (8.8 or 10 bolt housings)
• Axle tube location can be modified

What's included

• One pair of lower control arm mounts
• 1/2" bolts and machined spacers for a 3/4" rod end
• 4 doublers and 4 gussets

Installation and fitment notes

• Install with the back plate angled 10 degrees from the faceplate or rear cover
• Must be used with a double rod end style lower control arm. Will not work with bushing style arms
• You install the final gussets onto the housing tube
• 1979-2004 Mustang: cannot be used with a spring mounted on the control arm. Use the TRZ MUS-200R or a similar double adjustable 3/4" rod end arm
• Matching TRZ double adjustable lower control arms: S197 Mustang S197-200R, A-Body 317-200R, G-Body 319-200R, 3rd and 4th gen F-Body 34F-200R
• Not meant for stock location shock mounting
• Unmodified, these brackets hang lower than a beadlock ring. For brackets that do not hang below the ring, use the TRZ 6 hole adjustable lower control arm mounts