FuelTech

Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation. Kit Includes: EV...

Use this kit when building a custom harness while using injectors with EV6/EV14 connectors. Kit Includes: EV6/EV14 injector connector, (2) terminal...

If you are exceeding the limit for your ECU's internal MAP sensor or you want to add an external MAP sensor, the External MAP Sensor, 10 Bar provid...

Description Downloads The FuelTech Flex Fuel Sensor monitors and adjusts ignition timing, fuel injection, and boost levels based on the ethanol ...

Flex Fuel Sensor Connector Kit

Downloads  FT Dual Power Driver Manual The FT Dual Power Driver is a current amplifier that allows using the ECU outputs to activate electrica...

The FT Injector 1020 lb/hr (10,710 cc/min @ 90 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 120 lb/hr (1,260 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is req...

The FT Injector 120 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 170 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 240 lb/hr (2520cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 240 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 320 lb/hr (2,226 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 520 lb/hr (3,822 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Dri...

The FT Injector 720 lb/hr (5,449 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 80 lb/hr (840 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 80 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—requ...

The FT Injector 820 lb/hr (5,880 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

Dimensions Upper - (7.52 x 3.53) Lower - (7.59 x 2.62)   Each Low Impedance FT Injector (320 lb/h, 520 lb/h, 720 lb/hr & 820lb/h) fits one ...

Description Downloads Input Expander Module for PowerFT line  FT Input Expander Manual Input Expander Module for PowerFT line (FT500 / FT500LI...

Description Downloads The FuelTech Input Expander module adds 24 additional inputs (20 analog and 4 VR) when used with any PowerFT line ECU (FT4...