Skip to content
BLACK FRIDAY - 10% OFF BPS - ENDS 12/2/2024
BLACK FRIDAY - 10% OFF BPS - ENDS 12/2/2024

Billet Pro Shop

Filters

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Bypass/delete.

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Bypass/delete

Billet Pro Shop
$190.00 - $190.00
$190.00
$190.00 - $190.00
$190.00

Oil cooler bypass for the new Ford 7.3L Godzilla. Features: CNC machined 6061-T6 aluminum Hard black anodized Includes stainless st...

View full details
$190.00 - $190.00
$190.00
$190.00 - $190.00
$190.00
BPS EGT Bulkhead (Sold in pairs)

BPS EGT Bulkhead (4 Probes)

Billet Pro Shop
$133.00 - $265.00
$133.00 - $265.00
$133.00 - $265.00
$133.00

The BPS EGT Bulkhead facilitates the passage of wires through the firewall and works with Holley/Low Dollar EGT connectors, featuring a locking mec...

View full details
$133.00 - $265.00
$133.00 - $265.00
$133.00 - $265.00
$133.00
BPS 2020+ Ford 7.3L Godzilla Oil Cooler Coolant Block-Off - Billet Pro Shop

BPS 2020+ Ford 7.3L Godzilla Oil Cooler Coolant Block-Off

Billet Pro Shop
$87.00 - $87.00
$87.00
$87.00 - $87.00
$87.00

This fitting will fill the coolant passage void left on the side of the block when deleting the oil cooler. (Located on driver side above oil coole...

View full details
$87.00 - $87.00
$87.00
$87.00 - $87.00
$87.00
BPS 2011+ Coyote Secondary Chain Guides - Billet Pro Shop

BPS 2011+ Coyote Secondary Chain Guides

Billet Pro Shop
$131.00 - $131.00
$131.00
$131.00 - $131.00
$131.00

Billet Pro Shop secondary guides are the solution for engines that run locked out cams; especially those with increased valve spring pressure and ...

View full details
$131.00 - $131.00
$131.00
$131.00 - $131.00
$131.00
BPS 2020+ Ford 7.3L Godzilla Engine Lift Plate.

BPS 2020+ Ford 7.3L Godzilla Engine Lift Plate

Billet Pro Shop
$146.00 - $146.00
$146.00
$146.00 - $146.00
$146.00

Make your swap an easy one with our engine lift plates. These bolt up to the heads using all the intake manifold bolt locations.  Features: Hardw...

View full details
$146.00 - $146.00
$146.00
$146.00 - $146.00
$146.00
BPS Crossover Plug (2003-2004 Cobra).

BPS Crossover Plug (2003-2004 Cobra)

Billet Pro Shop
$58.00 - $72.00
$58.00 - $72.00
$58.00 - $72.00
$58.00

OE replacement coolant crossover tube plug. Features: Billet Stainless Steel O-rings to ensure a proper seal Offered in a natural machined finish ...

View full details
$58.00 - $72.00
$58.00 - $72.00
$58.00 - $72.00
$58.00
BPS Exhaust Trim Ring

BPS Exhaust Trim Ring

Billet Pro Shop
$23.00 - $23.00
$23.00
$23.00 - $23.00
$23.00

 CNC laser cut 16 gauge aluminum, perfect thickness to fit body curves. Sold individually. Includes 8 aluminum rivets. Please select your exhaust t...

View full details
$23.00 - $23.00
$23.00
$23.00 - $23.00
$23.00
BPS Billet Shank/Flat Aluminum Lug Nuts - Billet Pro Shop

BPS Billet Shank/Flat Aluminum Lug Nuts

Billet Pro Shop
$147.00 - $177.00
$147.00 - $177.00
$147.00 - $177.00
$147.00

 Our aluminum shank lugs are designed to fit wheels requiring a 1/2” shank. These will enable you to keep the factory sized studs and install your ...

View full details
$147.00 - $177.00
$147.00 - $177.00
$147.00 - $177.00
$147.00
BPS Valve Cover Inserts (2007-2014-GT500 & 2003-2004 Cobra).

BPS Valve Cover Inserts (2007-2014-GT500 & 2003-2004 Cobra)

Billet Pro Shop
$184.00 - $184.00
$184.00
$184.00 - $184.00
$184.00

Our billet aluminum inserts for the 1993-2014 4.6 / 5.4 application are a great add-on to dress up your engine. These inserts are offered in hard b...

View full details
$184.00 - $184.00
$184.00
$184.00 - $184.00
$184.00
BPS Front Cylinder Head Coolant Adapters (2011-2020 Mustang).

BPS Front Cylinder Head Coolant Adapters (2011-2020 Mustang)

Billet Pro Shop
$87.00 - $174.00
$87.00 - $174.00
$87.00 - $174.00
$87.00

Replace the factory coolant system with AN fittings and hoses using our billet adapters. These provide you the possibility of running a dry decked ...

View full details
$87.00 - $174.00
$87.00 - $174.00
$87.00 - $174.00
$87.00
BPS Acorn/Cone Seat Aluminum Lug Nuts - Billet Pro Shop

BPS Acorn/Cone Seat Aluminum Lug Nuts

Billet Pro Shop
$147.00 - $147.00
$147.00
$147.00 - $147.00
$147.00

 Our aluminum acorn lugs are designed to fit wheels requiring an OEM style acorn seat. Features: CNC machined billet aluminum that has been surfac...

View full details
$147.00 - $147.00
$147.00
$147.00 - $147.00
$147.00
BPS "Terminator" Coil Covers (2003-2004 Cobra).

BPS "Terminator" Coil Covers (2003-2004 Cobra)

Billet Pro Shop
$351.00 - $351.00
$351.00
$351.00 - $351.00
$351.00

Factory replacement billet coil covers for 2003-2004 "Terminator" SVT Cobras. Features: CNC machined 6061-T6 aluminum Direct replacement for OE co...

View full details
$351.00 - $351.00
$351.00
$351.00 - $351.00
$351.00
BPS Billet Coil Cover Inserts (2003-2004 Cobra).

BPS Billet Coil Cover Inserts (2003-2004 Cobra)

Billet Pro Shop
$43.00 - $43.00
$43.00
$43.00 - $43.00
$43.00

Replace the factory bolts that hold down the coil covers with these high quality CNC machined, billet inserts and stainless steel hardware. Like al...

View full details
$43.00 - $43.00
$43.00
$43.00 - $43.00
$43.00
BPS Low-Pro Series Adapter Fitting ORB to AN - Billet Pro Shop

BPS Low-Pro Series Adapter Fitting ORB to AN

Billet Pro Shop
$25.00 - $36.00
$25.00 - $36.00
$25.00 - $36.00
$25.00

BPS Low-Pro Series Adapter Fittings were designed especially for those tight spaces. Our fittings have an overall reduced height compared to other ...

View full details
$25.00 - $36.00
$25.00 - $36.00
$25.00 - $36.00
$25.00
BPS 2011+ Coyote Timing Chain Arms/Guides - Billet Pro Shop

BPS 2011+ Coyote Timing Chain Arms/Guides

Billet Pro Shop
$316.00 - $689.00
$316.00 - $689.00
$316.00 - $689.00
$316.00

BPS timing chain arms are a direct factory replacement. Available in CNC machined 6061-T6 aluminum or our proprietary methanol resistant plastic po...

View full details
$316.00 - $689.00
$316.00 - $689.00
$316.00 - $689.00
$316.00
BPS Valve Cover Fittings.

BPS Valve Cover Fittings

Billet Pro Shop
$118.00 - $118.00
$118.00
$118.00 - $118.00
$118.00

BPS -10 & -12 Valve Cover Fittings are a direct fit into to either valve cover enabling you to install your Breather/Catch Can/PCV using high q...

View full details
$118.00 - $118.00
$118.00
$118.00 - $118.00
$118.00
BPS 2011-2022 Coyote Billet Rear Main Seal Cover - Billet Pro Shop

BPS 2011-2022 Coyote Billet Rear Main Seal Cover

Billet Pro Shop
$257.00 - $257.00
$257.00
$257.00 - $257.00
$257.00

Our CNC machined billet rear main seal covers are crafted from 6061-T6 aluminum and are designed to provide increased block rigidity, especially fo...

View full details
$257.00 - $257.00
$257.00
$257.00 - $257.00
$257.00
BPS Coyote VCT Block-Offs.

BPS Coyote VCT Block-Offs

Billet Pro Shop
$116.00 - $116.00
$116.00
$116.00 - $116.00
$116.00

These billet pieces will fill the void left when VCT is deleted. Simply installed by pressing them into the factory seals. Sold in a quantity of fo...

View full details
$116.00 - $116.00
$116.00
$116.00 - $116.00
$116.00
BPS Coyote VCT Lock Outs (2011+ Mustang).

BPS Coyote VCT Lock Outs (2011+ Mustang)

Billet Pro Shop
$337.00 - $630.00
$337.00 - $630.00
$337.00 - $630.00
$337.00

CNC machined 6061-T6 aluminum lockouts for 2011-2023 Coyote. Does not include hardware. Features: CNC machined 6061-T6 Black Anodized finish Cam p...

View full details
$337.00 - $630.00
$337.00 - $630.00
$337.00 - $630.00
$337.00
BPS 2011-2017 Coyote Secondary Tensioner Flip Bracket - Billet Pro Shop

BPS 2011-2017 Coyote Secondary Tensioner Flip Bracket

Billet Pro Shop
$96.00 - $96.00
$96.00
$96.00 - $96.00
$96.00

Like all modular engines, tension on the driver side head is applied in the wrong direction causing inconsistencies in the position of the cams. Th...

View full details
$96.00 - $96.00
$96.00
$96.00 - $96.00
$96.00
BPS Lightweight Brake Package (2005-2014 Mustang)

BPS Lightweight Brake Package (2005-2014 Mustang)

Billet Pro Shop
$337.00 - $403.00
$337.00 - $403.00
$337.00 - $403.00
$337.00

 This kit includes a pair of 10.5” drilled and slotted rotors, a pair of lightweight relocation brackets for the OEM calipers and ABS mounting brac...

View full details
$337.00 - $403.00
$337.00 - $403.00
$337.00 - $403.00
$337.00
BPS Lightweight Radiator Supports (2005-2014 Mustang).

BPS Lightweight Radiator Supports (2005-2014 Mustang)

Billet Pro Shop
$191.00 - $191.00
$191.00
$191.00 - $191.00
$191.00

This Radiator Support is a direct replacement for all 05-14 mustangs who do not use the front sway bar. Weighing in at 1 pound 5 ounces for the pai...

View full details
$191.00 - $191.00
$191.00
$191.00 - $191.00
$191.00
BPS Heater Core Return Fitting (2011-2020 Mustang).

BPS Heater Core Return Fitting (2011-2020 Mustang)

Billet Pro Shop
$80.00 - $80.00
$80.00
$80.00 - $80.00
$80.00

Replace the factory coolant system with AN fittings and hoses using our billet fittings.  Features: Stainless steel hardware included Hard black ...

View full details
$80.00 - $80.00
$80.00
$80.00 - $80.00
$80.00
BPS Modular/Coyote Engine Mid Plate.

BPS Modular/Coyote Engine Mid Plate

Billet Pro Shop
$177.00 - $177.00
$177.00
$177.00 - $177.00
$177.00

CNC cut 316 Stainless Steel Mid Plate. 0.080" thickness to ensure no alignment issues with starter. Must be used with front motor plates. 

$177.00 - $177.00
$177.00
$177.00 - $177.00
$177.00

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare