Fuel Injectors

Injector Dynamics 1750-XDS - 60mm Length - 14mm Grey Top - Silver Bottom Adapt (Set of 8)

Injector Dynamics 1340cc Injector - 60mm Length - 14mm Grey Top - Blue Bottom Adaptor (Set of 8)

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 8)

The FT Injector 230 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 240 lb/hr (2520cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 720 lb/hr (5,449 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

Ford Mustang GT (2005-2016)/GT350 (2015-2016)/ Boss 302 (2012-2013)/Cobra (1999-2004) Fuel Injector Clinic Injector Set: 8 x 1000cc/min (95lbs/hr) ...

Mustang GT (2005-2016 )/GT350 (2015-2016)/ Boss 302 (2012-2013)/Cobra (1999-2004) Injector Set: 8 x 2150 cc Saturated / High Impedance Ball & S...

Injector Dynamics 2600-XDS Injectors - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)

Injector Dynamics 1750-XDS - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)

Injector Dynamics 2600-XDS Injectors - 60mm Length - 14mm Top - 14mm Bottom Adapter (Set of 8)

Injector Dynamics 1340cc Injectors - 48mm Length - 14mm Grey Top - 14mm Lower O-Ring (Set of 8)

Injector Dynamics - 1050cc Injectors 60mm Length 14mm Grey Adaptor Top - Blue Bottom Adap (Set of 8)

The FT Injector 80 lb/hr (840 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 120 lb/hr (1,260 cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is req...

The FT Injector 1020 lb/hr (10,710 cc/min @ 90 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 320 lb/hr (2,226 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

The FT Injector 85 lb/hr GEN 3 is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector ...

Impedence: Low (1.6 Ohm) Fuel Pressure Rating: 160-325# @ 43.5 psi, 500-850# @ 90 psi Spray Pattern: Wide Atomization Connector: Jetronic / Minitim...

The FT Injector 170 lb/hr (1785cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

The FT Injector 820 lb/hr (5,880 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...