1-855-260-7007
AEM
AEM Performance Electronics water/methanol injection: V3 kits with boost dependent or Multi-Input controllers, with a 1.15 gallon reservoir, a 5 gallon tank or no tank, plus the controllers, injectors, pumps, tanks, solenoid, filter and replacement parts to build or service a system. Need an AEM part that is not listed yet? Contact us.
Filters
AEM Water/Methanol Reservoir Cap
AEMReplacement cap for AEM water/methanol reservoirs. It fits both the 1.15 gallon and the 5 gallon AEM tanks.Features Direct replacement for the AEM ...
View full detailsAEM Wiring Harness for V3 Multi-Input Water/Methanol Controller
AEMPlug and play replacement wiring harness for the AEM V3 Multi-Input water/methanol controller. It fits the Multi-Input controller only.Features Dir...
View full detailsAEM V3 Water/Methanol Hose Kit, 20 ft. of 1/4 in. Nylon
AEM20 feet of AEM 1/4 in. black nylon water/methanol injection hose. Use it to replace damaged line or to add length to an existing system.Specificati...
View full detailsAEM Water/Methanol Injection Tank, 5 Gallon with Fluid Level Sensor
AEMAEM's 5 gallon water/methanol tank with a conductive fluid level sensor. It is universal, so it works with AEM kits and with third party systems, a...
View full detailsAEM Water/Methanol Injection Reservoir, 1.15 Gallon with Fluid Level Sensor
AEMThe AEM 1.15 gallon water/methanol reservoir, the same compact tank that comes in the 30-3300 and 30-3350 kits. A conductive low fluid level sensor...
View full detailsAEM Water/Methanol Injection Pump, 200 PSI, 1/4 in. Push-Lock
AEMThe AEM 200 psi recirculation style water/methanol pump with integrated 1/4 in. push lock hose connections. It is the replacement pump for AEM wate...
View full detailsAEM Water/Methanol Injection Pump, 200 PSI, 3/8 NPT Ports
AEMAEM's 200 psi recirculation style water/methanol pump with 3/8 NPT ports, for systems plumbed with custom hard line or braided line instead of push...
View full detailsAEM Water/Methanol Injection Inline Filter, 1/4 in.
AEMAEM's inline water/methanol filter catches particulates down to 40 microns before they reach the pump, injector and engine. It installs in the line...
View full detailsAEM Water/Methanol Injection Solenoid
AEMAEM's high flow, low current water/methanol solenoid. It is a 2-way, normally closed 12 V valve with a stainless steel body that shuts the line off...
View full detailsAEM V3 Water/Methanol HD Injector Kit (2 Injectors)
AEMA pair of AEM V3 water/methanol injectors for dual nozzle setups. Each injector comes with its own set of interchangeable Swirl Generators, and the...
View full detailsAEM V3 Water/Methanol Injector Kit
AEMThe AEM V3 water/methanol injector, the same one that comes in every AEM V3 kit. It is a direct replacement and upgrade for the V2 injector in olde...
View full detailsAEM V3 Water/Methanol Multi-Input Controller Kit (Controller and Harness)
AEMThe AEM V3 Multi-Input water/methanol controller and wiring harness on their own. Instead of an internal MAP sensor, this controller is triggered b...
View full detailsAEM V3 Water/Methanol HD Controller Kit, 40 PSI (Controller and Harness)
AEMThe AEM V3 HD boost dependent water/methanol controller and wiring harness on their own. The internal MAP sensor is rated to 40 psi. Use it to repl...
View full detailsAEM V3 Water/Methanol Standard Controller Kit, 35 PSI (Controller and Harness)
AEMThe AEM V3 boost dependent water/methanol controller and wiring harness on their own. Use it to replace a damaged controller or to build a system a...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, No Reservoir
AEMThe AEM V3 Multi-Input water/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The Multi-Input controll...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, 5 Gallon Reservoir
AEMThe big one in AEM's Multi-Input lineup: the V3 water/methanol kit with the 5 gallon tank and two injectors, built for HD high output gasoline appl...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, 1.15 Gallon Reservoir
AEMAEM's V3 water/methanol kit with the Multi-Input controller, for high compression naturally aspirated engines and for boosted engines running more ...
View full detailsAEM V3 Water/Methanol Injection Kit, 40 PSI HD Controller, No Reservoir
AEMThe AEM V3 HD water/methanol kit without the tank, for race and diesel applications that already have a reservoir or need a custom one. The boost d...
View full details
Save $98.00
Save $0.00
AEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir
AEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir
AEMThe AEM V3 standard water/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The boost dependent control...
View full detailsAEM V3 Water/Methanol Injection Kit, 40 PSI HD Controller, 5 Gallon Reservoir
AEMAEM's V3 HD water/methanol injection kit for race and turbo diesel applications. The boost dependent HD controller has an on-board MAP sensor good ...
View full detailsAEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, 1.15 Gallon Reservoir
AEMAEM's V3 water/methanol injection kit for boosted gas engines running up to 35 psi. The boost dependent controller has an on-board MAP sensor with ...
View full details