Sensors

Lowdoller Motorsports magnet triggered hall effect speed sensor in an M8 x 1.0 nickel plated flush mount body. This one reads magnets, not steel te...

Lowdoller Motorsports hall effect driveshaft speed sensor in a 3/8"-24 stainless flush mount body. Triggered by ferrous metal, so it reads steel re...

Lowdoller Motorsports drop-in replacement for the factory LS oil pressure sensor. M16 x 1.5 thread, same OEM GM scaling, so it works with HP Tuners...

Lowdoller Motorsports 3 bar MAP sensor for boosted combos up to 29 PSI. The lower the bar rating, the more resolution the ECU gets per PSI, so pick...

Lowdoller Motorsports 6" stroke linear travel sensor with a 1" body. The 1" body gives about three times the contact area of the 1/2" sensor for cl...

Lowdoller Motorsports 4" stroke linear travel sensor with a 1/2" body. The go-to size for most front shocks on a door car, and long enough for shif...

Lowdoller Motorsports low range 899-series sensor for carb fuel pressure, coolant pressure and similar jobs under 30 PSI. Range: 0-30 PSI Output: ...

Lowdoller Motorsports heavy duty ring terminal thermocouple for cylinder head temperature. The ring bolts under a head bolt, stud or accessory bolt...

Lowdoller Motorsports 6" stroke linear travel sensor with a 1/2" body. For longer travel front suspensions and steering knuckle position. It output...

Lowdoller Motorsports non-contact infrared temperature sensor for logging track surface temperature or tire temperature during the pass, which is t...

Lowdoller Motorsports complete 8 cylinder EGT kit with 1/8" OD Inconel K-type probes. Everything to put exhaust gas temperature on 8 cylinders: pro...

Lowdoller Motorsports pressure and temperature combo sensor for the brake system: 0-1500 PSI and 0-500°F from one 1/8" NPT port. Log line pressure ...

Lowdoller Motorsports 799-series 0-300 PSI pressure sensor. Dry ceramic transducer with a 0.5V to 4.5V output on a 5V supply, the same scaling Holl...

Lowdoller Motorsports pressure and temperature combo sensor: 0-100 PSI and 0-500°F from one port. Metric M12 x 1.5 thread with a sealing ring, the ...

Type K Thermocouple EGT Probe - Exposed Tip offers faster and more accurate temperature sensor readings for exhaust gases. The exposed tip EGT prob...

FuelTech's EGT-4 CAN is a 4-channel EGT controller CAN module, connecting up to 4 type K thermocouples and sending the input signals to the ECU via...

Description Downloads The 3-in-1 NanoPRO is a Wideband O2 Sensor Controller, Dash Display, and Switch Panel in one! Wideband O2 Senser Cont...