1-855-260-7007
Deals & Clearance
Filters
AEM Water/Methanol Injection Inline Filter, 1/4 in.
AEMAEM's inline water/methanol filter catches particulates down to 40 microns before they reach the pump, injector and engine. It installs in the line...
View full detailsAEM V3 Water/Methanol Injector Kit
AEMThe AEM V3 water/methanol injector, the same one that comes in every AEM V3 kit. It is a direct replacement and upgrade for the V2 injector in olde...
View full detailsAEM V3 Water/Methanol HD Injector Kit (2 Injectors)
AEMA pair of AEM V3 water/methanol injectors for dual nozzle setups. Each injector comes with its own set of interchangeable Swirl Generators, and the...
View full detailsAEM V3 Water/Methanol Injection Kit, 40 PSI HD Controller, No Reservoir
AEMThe AEM V3 HD water/methanol kit without the tank, for race and diesel applications that already have a reservoir or need a custom one. The boost d...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, 1.15 Gallon Reservoir
AEMAEM's V3 water/methanol kit with the Multi-Input controller, for high compression naturally aspirated engines and for boosted engines running more ...
View full details
Save $91.00
Save $0.00
AEM V3 Water/Methanol Injection Kit, 40 PSI HD Controller, 5 Gallon Reservoir
AEM V3 Water/Methanol Injection Kit, 40 PSI HD Controller, 5 Gallon Reservoir
AEMAEM's V3 HD water/methanol injection kit for race and turbo diesel applications. The boost dependent HD controller has an on-board MAP sensor good ...
View full details
Save $67.00
Save $0.00
AEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir
AEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, No Reservoir
AEMThe AEM V3 standard water/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The boost dependent control...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, 5 Gallon Reservoir
AEMThe big one in AEM's Multi-Input lineup: the V3 water/methanol kit with the 5 gallon tank and two injectors, built for HD high output gasoline appl...
View full detailsAEM V3 Water/Methanol Injection Kit, Multi-Input Controller, No Reservoir
AEMThe AEM V3 Multi-Input water/methanol kit without the tank, for builds that already have a reservoir or need a custom one. The Multi-Input controll...
View full detailsAEM V3 Water/Methanol Injection Kit, 35 PSI Standard Controller, 1.15 Gallon Reservoir
AEMAEM's V3 water/methanol injection kit for boosted gas engines running up to 35 psi. The boost dependent controller has an on-board MAP sensor with ...
View full details*OPEN BOX* Weld Full Throttle 1-Piece Frontrunners 15x3.5 Strange Spindle Mount, 1.75" BS, Black - Pair 82B-15001
Weld RacingOpen box pair of Weld Racing Full Throttle 1-piece drag frontrunners, 15x3.5, Strange spindle mount, black anodized. Brand new, never mounted. Sold...
View full detailsTBM 05-14 Mustang S197 Front or Rear Brake Line Kit for TBM Brakes TB-FBK18
TBMBrake line kit that connects the factory brake lines on a 2005-2014 Ford Mustang S197 to TBM calipers. TBM lists this same kit, TB-FBK18, for both ...
View full detailsTBM 05-14 Mustang S197 Medium Duty Front Drag Race Brake Kit (Reusing Factory Hubs) 001-0273
TBMTBM Medium Duty front drag race brake kit for the 2005-2014 Ford Mustang S197, reusing the factory hubs. It pairs the F3 4 piston caliper with a 1/...
View full detailsTBM 94-04 Mustang (Reusing Factory Hubs) 001-0224
TBMTBM Brakes Ford Front Drag Racing Brake Kits are lightweight and are not suitable for use with factory rear brakes/proportioning. They must be use...
View full detailsTBM 2024+ Mustang S650 Rear Drag Race Brake Kit (Reusing Factory Hubs) 001-0297
TBMTBM F3 rear drag race brake kit for the 2024+ Ford Mustang S650, reusing the factory hubs. Available with standard forged F3 calipers or black X-Se...
View full detailsTBM 74-78 Mustang II (& Pinto) w/ 5 on 4.75 Hubs 001-0264
TBMTBM Brakes Ford Front Drag Racing Brake Kits are lightweight and are not suitable for use with factory rear brakes/proportioning. They must be use...
View full detailsTBM 15-21 Mustang (Reusing Factory Hubs) 001-0248
TBMTBM Ford Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be u...
View full detailsTBM 2024+ Mustang S650 Medium Duty Front Drag Race Brake Kit (Reusing Factory Hubs) 001-0328
TBMTBM F3 medium duty front drag race brake kit for the 2024+ Ford Mustang S650, reusing the factory hubs. About 23 lb for both sides versus roughly 4...
View full detailsTBM 74-78 Mustang II (& Pinto) w/ 5 on 4.50 Hubs 001-0269
TBMTBM Brakes Ford Front Drag Racing Brake Kits are lightweight and are not suitable for use with factory rear brakes/proportioning. They must be use...
View full detailsHolley EFI Terminator X Fox Body Mustang 5.0 MPFI Kit, TFI Distributor, EV1 Injectors (1987-1993)
HolleyThis is the Terminator X kit built for the Fox Body Mustang with the factory 302 and the stock TFI distributor. The Fox Body specific main harness,...
View full detailsEcumaster Intake Air Temperature Sensor Kit - 3/8npt
EcumasterTemperature sensor for use with standalone engine management.Includes GM Style Intake Air Temperature Sensor, Aluminum Weld Bung, Connector and Pins.
Ecumaster 10Bar Pressure Sensor Kit
EcumasterPressure sensor for use with standalone engine management.Stainless body pressure sensor, 1/8 NPT Thread, .5-4.5 Volt.
Ecumaster Flat Response Knock Sensor Kit - M12
EcumasterSensor for use with standalone engine management.Includes one flat (wideband) response knock sensor, mounting bolt to suit other applications, conn...
View full detailsEcumaster Single EGT Sensor Kit
EcumasterTemperature sensor for use with standalone engine management.Includes 90 degree Type K EGT probe with stainless fittings and weld bung to suit 1/8 ...
View full details