Fuel System

Factory fuel rails are built for factory power. Once you start pushing real boost or nitrous through a Coyote, restrictive OE rails become the bott...

Fuel Line Adapter kit which provides you with all the fuel fittings needed along with pushlock fuel hose to connect to your factory feed fitting us...

The factory GT500 fuel system holds up fine at factory power. Start pulling the blower pulley down, add boost, or move to a larger injector, and th...

A small part that solves a packaging problem. The feed arrives at the rail from one direction and the hose has to leave in the other, around a blow...

Ford’s new 7.3L Godzilla platform is gaining traction with swaps popping up everywhere. We wasted no time in releasing new high flow -8 AN fuel ra...

High-quality timing-style belt designed for mechanical fuel pump drives. 0.375" pitch 1/2" wide Available in sizes from 17.6" to 37.5" outer ...

For use when plumbing direct injection feed hose on 18+ Coyote. BPS part number: F006 Used alongside our 2011-2025 Coyote fuel rails (F002) on 2018...

Our ALL-NEW Extreme-Flow EFI Regulator now comes with -12 ports! It?s designed for use with Belt or Hex Drive Fuel Pumps. Compact, 2-Port Body with...

12 GPM Belt Drive Mechanical Fuel Pump. Designed to feed serious EFI and Carbureted engines, gasoline, ethanol, or methanol. The 12 Series Belt Dri...

Injector Dynamics 1750-XDS - 60mm Length - 14mm Grey Top - Silver Bottom Adapt (Set of 8)

Injector Dynamics 1340cc Injector - 60mm Length - 14mm Grey Top - Blue Bottom Adaptor (Set of 8)

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 8)

The FT Injector 230 lb/h Short Length EV6 is a high-performance, high-impedance fuel injector built for precision, reliability, and versatility—req...

The FT Injector 240 lb/hr (2520cc/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is requir...

Extreme Flow EFI Regulator Designed for use with Eliminator, Pro Pump, and Dual A1000 fuel system. Compact 2-port body with dual AN-10 inlet/outlet...

The FT Injector 720 lb/hr (5,449 cc/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak & Hold Driv...

Ford Mustang GT (2005-2016)/GT350 (2015-2016)/ Boss 302 (2012-2013)/Cobra (1999-2004) Fuel Injector Clinic Injector Set: 8 x 1000cc/min (95lbs/hr) ...

Mustang GT (2005-2016 )/GT350 (2015-2016)/ Boss 302 (2012-2013)/Cobra (1999-2004) Injector Set: 8 x 2150 cc Saturated / High Impedance Ball & S...

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace...

Aeromotive Brushless Spur Gear In-Tank (90 Degree) Fuel Pump w/TVS Controller - 7gpm

Injector Dynamics 2600-XDS Injectors - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)

Replace original X1 Series regulator internals with the conversion kit of your choice (Part #'s 13013, 13014, and 13015) and you have a regulator...

Injector Dynamics 1750-XDS - 48mm Length - 14mm Top - 14mm Lower O-Ring (Set of 8)