BPS Ford 6.2L Boss Billet Crank Trigger Ring (36-1 & 60-2)
Racing Use Only, Not Legal for Road Use
Our billet crank trigger ring replaces the stamped steel reluctor Ford presses onto the back of the 6.2L Boss crankshaft. The factory ring is a stamping, and its teeth are not held to the kind of tolerance a high RPM engine needs. Uneven tooth edges show up as noise and jitter on the crank signal, which the ECU reads as timing error. A ring machined from billet steel keeps every tooth edge and the missing tooth gap where they belong, so the crank sensor sees the same clean signal at idle and at the top of the rev range.
Also called a crank reluctor ring, pulse ring, tone ring or crank trigger wheel, this is the toothed ring on the rear of the 6.2L crankshaft that the factory crank position sensor reads. It is not an external, front-mount crank trigger kit: it goes in the factory location and uses the stock sensor.
Features
- CNC machined from billet steel
- Black oxide finish
- Precise tooth profile for a consistent crank signal across the RPM range
- Both patterns balanced: centre of gravity on the crank axis, so the ring adds no imbalance to the rotating assembly
- 36-1 and 60-2 both use the factory 2-wire VR crank position sensor in the factory location
- Same ring body as our Coyote billet crank trigger ring, indexed for the 6.2L Boss crankshaft
Fitment
Ford used one crank sensor and one reluctor pattern (36-1, 2-wire VR) on every 6.2L Boss from 2010 to 2022, so the 36-1 ring is a direct replacement on all of them:
- 2010-2014 F-150 6.2L, including SVT Raptor
- 2011-2022 F-250 and F-350 Super Duty 6.2L
- 2017-2019 E-350 and E-450 6.2L
The 60-2 ring (EN060-60) is not a factory pattern on any 6.2L. Choose it only when your standalone ECU calls for a 60-2 crank reference. The factory PCM will not run on it.
Not for the Coyote 5.0 or the 7.3L Godzilla. Coyote engines use our Coyote crank trigger ring.
What's Included
- (1) Billet crank trigger ring
BPS part numbers: EN060-36 (36-1), EN060-60 (60-2)